Ningbo Ritbearing Imp & Exp Co.,Ltd.

Ball Bearing manufacturers / suppliers, offering Ball Bearing, Roller Bearing, Angular Contact Bearing, Stainless Steel Bearing, Agricultural Bearing, Thin Section Bearing and so on.

About Us

  • 1
  • 2
  • 3
  • 4
  • 5
Ningbo Ritbearing Imp & Exp Co.,Ltd.Ningbo Ritbearing Imp & Exp Co.,Ltd.Ningbo Ritbearing Imp & Exp Co.,Ltd.Ningbo Ritbearing Imp & Exp Co.,Ltd.Ningbo Ritbearing Imp & Exp Co.,Ltd.
Ningbo Ritbearing Imp & Exp Co.,Ltd.
Address: Room 618, Building B, Liyuan Shangdu, No. 39, Lane 158, West HuanCheng Road , Ningbo, Zhejiang, China
Member Since: 2016
Main Markets: Americas , Asia , Europe , Other Markets

Contact Us

Mobile:
Tel:
Fax:

Mr. HUANG HUILIN

Contact Us
Recommended Products
New Products
Hybrid Ceramic Ball Bearing

Product Description: Hybrid Ceramic Ball Bearing use a combination of traditional 52100 steel rings precision matched with silicon nitride (ceramic) balls. In addition to being excellent electric insulators, Ceramic Ball Bearing have a higher speed capability and will provide longer service life than all-steel bearings in most applications. Hybrid Ceramic Ball Bearing with steel rings and ceramic balls have become indispensable for many advanced applications. The Hybrid Ceramic Bearing advantages have been clearly demonstrated by numerous trials and successful use in the field. Properties of Ceramic Ball Bearing Excellent for use in precision ball bearings. A comparison between silicon nitride and conventional bearing steel 100 Cr6 is shown in the diagram: Further advantages of ceramic are: Low chemical affinity to 100 Cr6 Low friction coefficient Little heat transfer Corrosion resistant Non-magnetic Electrically isolating Deep Groove Ball Bearing Designation Dimensions Mounting dimensions (mm)   Weight d D B r min da da Da ra (kg)      (mm)        min max max max ZrO2 Si3N4 684C 4 9 2.5 0.1 4.8 / 8.2 0.1 0.0005 0.0003 694C 4 11 4 0.15 5.2 / 9.8 0.15 0.0013 0.0007 604C 4 12 4 0.2 5.6 / 10.4 0.2 0.0017 0.0009 624C 4 13 5 0.2 5.6 / 11.4 0.2 0.0023 0.0013 634C 4 16 5 0.3 6 / 14 0.3 0.004 0.0022 685C 5 11 3 0.15 6.2 / 9.8 0.15 0.0009 0.0005 695C 5 13 4 0.2 6.6 / 11.4 0.2 0.0019 0.001 605C 5 14 5 0.2 6.6 / 12.4 0.2 0.0027 0.0015 625C 5 16 5 0.3 7 / 14 0.3 0.0038 0.0021 635C 5 19 6 0.3 7 / 17 0.3 0.0066 0.0036 686C 6 13 3.5 0.15 7.2 / 11.8 0.15 0.0015 0.0008 696C 6 15 5 0.2 7.6 / 13.4 0.2 0.003 0.0016 606C 6 17 6 0.3 8 / 15 0.3 0.0046 0.0025 626C 6 19 6 0.3 8 / 17 0.3 0.0063 0.0034 636C 6 22 7 0.3 8 / 20 0.3 0.0108 0.0058 687C 7 14 3.5 0.15 8.2 / 12.8 0.15 0.0017 0.0009 697C 7 17 5 0.3 9 / 15 0.3 0.004 0.0022 607C 7 19 6 0.3 9 / 17 0.3 0.0059 0.0032 627C 7 22 7 0.3 9 / 20 0.3 0.0098 0.0053 637C 7 26 9 0.3 9 / 24 0.3 0.0185 0.01 688C 8 16 4 0.2 9.6 / 14.4 0.2 0.0025 0.0014 698C 8 19 6 0.3 10 / 17 0.3 0.0056 0.003 608C 8 22 7 0.3 10 / 20 0.3 0.0093 0.005 628C 8 24 8 0.3 10 / 22 0.3 0.013 0.0072 638C 8 28 9 0.3 10 / 26 0.3 0.022 0.012 689C 9 17 4 0.2 10.6 / 15.4 0.2 0.0027 0.0015 699C 9 20 6 0.3 11 / 18 0.3 0.0065 0.0035 609C 9 24 7 0.3 11 / 22 0.3 0.011 0.006 629C 9 26 8 0.3 11 / 24 0.3 0.015 0.0081 639C 9 30 10 0.6 13 / 26 0.6 0.028 0.015 6800C 10 19 5 0.3 12 12 17 0.3 0.004 0.0021 6900C 10 22 6 0.3 12 12.5 20 0.3 0.007 0.0038 6000C 10 26 8 0.3 12 13 24 0.3 0.014 0.0075 6200C 10 30 9 0.6 14 16 26 0.6 0.025 0.013 6300C 10 35 11 0.6 14 16.5 31 0.6 0.04 0.022 6801C 12 21 5 0.3 14 14 19 0.3 0.005 0.0025 6901C 12 24 6 0.3 14 14.5 22 0.3 0.008 0.0042 16001C 12 28 7 0.3 14 / 26 0.3 0.015 0.0079 6001C 12 28 8 0.3 14 15.5 26 0.3 0.017 0.0092 6201C 12 32 10 0.6 16 17 28 0.6 0.028 0.015 6301C 12 37 12 1 17 18 32 1 0.046 0.025 6802C 15 24 5 0.3 17 17 22 0.3 0.005 0.0029 6902C 15 28 7 0.3 17 17 26 0.3 0.012 0.0063 16002C 15 32 8 0.3 17 / 30 0.3 0.021 0.011 6002C 15 32 9 0.3 17 19 30 0.3 0.024 0.013 6202C 15 35 11 0.6 19 20.5 31 0.3 0.035 0.019 6302C 15 42 13 1 20 22.5 37 1 0.064 0.035 6803C 17 26 5 0.3 19 19 24 0.3 0.005 0.0029 6903C 17 30 7 0.3 19 19.5 28 0.3 0.013 0.0071 16003C 17 35 8 0.3 19 / 33 0.3 0.025 0.014 6003C 17 35 10 0.3 19 21.5 33 0.3 0.032 0.017 6203C 17 40 12 0.6 21 23.5 36 0.6 0.052 0.028 6303C 17 47 14 1 22 25.5 42 1 0.087 0.047 6403C 17 62 17 1.1 23.5 / 55.5 1 0.21 0.11 6804C 20 32 7 0.3 22 22.5 30 0.3 0.013 0.007 6904C 20 37 9 0.3 22 24 35 0.3 0.028 0.015 16004C 20 42 8 0.3 22 / 40 0.3 0.037 0.02 6004C 20 42 12 0.6 24 25.5 38 0.6 0.052 0.028 6204C 20 47 14 1 25 26.5 42 1 0.082 0.045 6304C 20 52 15 1.1 26.5 28 45.5 1 0.11 0.06 6404C 20 72 19 1.1 26.5 / 65.5 1 0.31 0.17 6805C 25 37 7 0.3 27 27 35 0.3 0.016 0.009 6905C 25 42 9 0.3 27 28.5 40 0.3 0.032 0.018 16005C 25 47 8 0.3 27 / 45 0.3 0.045 0.025 6005C 25 47 12 0.6 29 30 43 0.6 0.061 0.033 6205C 25 52 15 1 30 32 47 1 0.099 0.054 6305C 25 62 17 1.1 31.5 36 55.5 1 0.18 0.098 6405C 25 80 21 1.5 33 / 72 1.5 0.41 0.22 6806C 30 42 7 0.3 32 32 50 1 0.018 0.01 6906C 30 47 9 0.3 32 34 57 1 0.04 0.022 16006C 30 55 9 0.3 32 42.5 65.5 1 0.067 0.036 6006C 30 55 13 1 35 36.5 53 1 0.089 0.048 6206C 30 62 16 1 35 38.5 60 1 0.15 0.083 6306C 30 72 19 1.1 36.5 42.5 68.5 1 0.27 0.14 6406C 30 90 23 1.5 54 / 82 2 0.57 0.31 6807C 35 47 7 0.3 37 37 45 0.3 0.021 0.011 6907C 35 55 10 0.6 39 39 51 0.6 0.058 0.031 16007C 35 62 9 0.3 37 / 60 0.3 0.082 0.045 6007C 35 62 14 1 40 41.5 57 1 0.12 0.063 6207C 35 72 17 1.1 41.5 44.5 65.5 1 0.22 0.12 6307C 35 80 21 1.5 43 47 72 1.5 0.36 0.19 6407C 35 100 25 1.5 43 / 92 1.5 0.73 0.4 6808C 40 52 7 0.3 42 42 50 0.3 0.02 0.013 6908C 40 62 12 0.6 44 46 58 0.6 0.09 0.05 16008C 40 68 9 0.3 42 / 66 0.3 0.1 0.05 6008C 40 68 15 1 45 47.5 63 1 0.15 0.08 6208C 40 80 18 1.1 46.5 50.5 73.5 1 0.28 0.15 6308C 40 90 23 1.5 48 53 80 1.5 0.49 0.27 6408C 40 110 27 2 49 / 101 2 0.946 0.513 6809C 45 58 7 0.3 47 47.5 56 0.3 0.029 0.016 6909C 45 68 12 0.6 49 50 64 0.6 0.097 0.053 16009C 45 75 10 0.6 49 / 71 0.6 0.13 0.07 6009C 45 75 16 1 50 53.5 70 1 0.19 0.1 6209C 45 85 19 1.1 51.5 55.5 78.5 1 0.32 0.175 6309C 45 100 25 1.5 53 61.5 92 1.5 0.64 0.345 6409C 45 120 29 2 54 / 111 2 1.18 0.64 6810C 50 65 7 0.3 52 52.5 63 0.3 0.038 0.021 6910C 50 72 12 0.6 54 55 68 0.6 0.1 0.06 16010C 50 80 10 0.6 54 / 76 0.6 0.13 0.07 6010C 50 80 16 1 55 58.5 75 1 0.2 0.11 6210C 50 90 20 1.1 56.5 60 83.2 1 0.35 0.19 6310C 50 110 27 2 59 68 101 2 0.82 0.44 6410C 50 130 31 2.1 61 / 119 2 1.45 0.78 6811C 55 72 9 0.3 57 59 70 0.3 0.06 0.03 6911C 55 80 13 1 60 61.5 75 1 0.15 0.08 16011C 55 90 11 0.6 59 / 86 0.6 0.2 0.11 6011C 55 90 18 1.1 61.5 64 83.5 1 0.29 0.16 6211C 55 100 21 1.5 63 66.5 92 1.5 0.48 0.26 6311C 55 120 29 2 64 72.5 111 2 1.05 0.57 6411C 55 140 33 2.1 66 / 129 2 1.76 0.95 6812C 60 78 10 0.3 62 64 76 0.3 0.08 0.04 6912C 60 85 13 1 65 66 80 1 0.15 0.08 16012C 60 95 11 0.6 64 / 91 0.6 0.22 0.12 6012C 60 95 18 1.1 66.5 69 88.5 1 0.32 0.17 6212C 60 110 22 1.5 68 74.5 102 1.5 0.6 0.33 6312C 60 130 31 2.1 71 79 119 2 1.32 0.72 6412C 60 150 35 2.1 71 139 2 2.13 1.15 6813C 65 85 10 0.6 69 69 81 0.6 0.1 0.05 6913C 65 90 13 1 70 71.5 85 1 0.17 0.09 16013C 65 100 11 0.6 69 / 96 0.6 0.23 0.13 6013C 65 100 18 1.1 71.5 73 93.5 1 0.34 0.18 6213C 65 120 23 1.5 73 80 112 1.5 0.77 0.42 6313C 65 140 33 2.1 76 85.5 129 2 1.62 0.88 6814C 70 90 10 0.6 74 74.5 86 0.6 0.1 0.056 6914C 70 100 16 1 75 77.5 95 1 0.27 0.15 16014C 70 110 13 0.6 74 / 106 0.6 0.34 0.18 6014C 70 110 20 1.1 76.5 80.5 103.5 1 0.47 0.25 6214C 70 125 24 1.5 78 84 117 1.5 0.84 0.45 6314C 70 150 35 2.1 81 92 139 2 1.98 1.07 6815C 75 95 10 0.6 79 79.5 91 0.6 0.11 0.06 6915C 75 105 16 1 80 82 100 1 0.28 0.15 16015C 75 115 13 0.6 79 / 111 0.6 0.36 0.19 6015C 75 115 20 1.1 81.5 85.5 108.5 1 0.5 0.27 6215C 75 130 25 1.5 83 90 122 1.5 0.92 0.5 6816C 80 100 10 0.6 84 84.5 96 0.6 0.12 0.063 6916C 80 110 16 1 85 87.5 105 1 0.3 0.16 16016C 80 125 14 0.6 84 / 121 0.6 0.48 0.26 6016C 80 125 22 1.1 86.5 91 118.5 1 0.67 0.36 6216C 80 140 26 2 89 95.5 131 2 1.09 0.59 6817C 85 110 13 1 90 90.5 105 1 0.2 0.11 6917C 85 120 18 1.1 91.5 94.5 113.5 1 0.42 0.23 16017C 85 130 14 0.6 89 / 126 0.6 0.5 0.27 6017C 85 130 22 1.1 91.5 96 123.5 1 0.71 0.38 6217C 85 150 28 2 94 102 141 2 1.35 0.73 6818C 90 115 13 1 95 95.5 110 1 0.21 0.12 6918C 90 125 18 1.1 96.5 98.5 118.5 1 0.45 0.24 16018C 90 140 16 1 95 / 135 1 0.67 0.36 6018C 90 140 24 1.5 98 103 132 1.5 0.92 0.5 6819C 95 120 13 1 100 102 115 1 0.23 0.12 6919C 95 130 18 1.1 101.5 104 123.5 1 0.46 0.25 16019C 95 145 16 1 100 / 140 1 0.7 0.38 6019C 95 145 24 1.5 103 109 137 1.5 0.95 0.51 6820C 100 125 13 1 105 106 120 1 0.24 0.13 6920C 100 140 20 1.1 106.5 111 133.5 1 0.64 0.35 16020C 100 150 16 1 105 / 145 1 0.73 0.39 6020C 100 150 24 1.5 108 113 142 1.5 0.99 0.54 6821C 105 130 13 1 110 111 125 1 0.25 0.14 6921C 105 145 20 1.1 111.5 116 138.5 1 0.66 0.36 6822C 110 140 16 1 115 117 135 1 0.38 0.21 6922C 110 150 20 1.1 116.5 121 143.5 1 0.69 0.37 6824C 120 150 16 1 125 127 145 1 0.41 0.22 Angular Contact Ball Bearings 7900C 10 22 6 0.3 0.15 12.5 19.5 0.3 0.007 0.0038 7000C 10 26 8 0.3 0.15 12.5 23.5 0.3 0.014 0.0075 7200C 10 30 9 0.6 0.3 15 25 0.6 0.025 0.013 7300C 10 35 11 0.6 0.3 15 30 0.6 0.04 0.022 7901C 12 24 6 0.3 0.15 14.5 21.5 0.3 0.008 0.0042 7001C 12 28 8 0.3 0.15 14.5 25.5 0.3 0.017 0.0092 7201C 12 32 10 0.6 0.3 17 27 0.6 0.028 0.015 7301C 12 37 12 1 0.6 18 31 1 0.046 0.025 7902C 15 28 7 0.3 0.15 17.5 25.5 0.3 0.012 0.0063 7002C 15 32 9 0.3 0.15 17.5 29.5 0.3 0.024 0.013 7202C 15 35 11 0.6 0.3 20 30 0.3 0.035 0.019 7302C 15 42 13 1 0.6 21 36 1 0.064 0.035 7903C 17 30 7 0.3 0.15 19.5 27.5 0.3 0.013 0.0071 7003C 17 35 10 0.3 0.15 19.5 32.5 0.3 0.032 0.017 7203C 17 40 12 0.6 0.3 22 35 0.6 0.052 0.028 7303C 17 47 14 1 0.6 23 41 1 0.087 0.047 7904C 20 37 9 0.3 0.15 22.5 34.5 0.3 0.028 0.015 7004C 20 42 12 0.6 0.3 25 37 0.6 0.052 0.028 7204C 20 47 14 1 0.6 26 41 1 0.082 0.045 7304C 20 52 15 1.1 0.6 27 45 1 0.11 0.06 7905C 25 42 9 0.3 0.15 27.5 39.5 0.3 0.032 0.018 7005C 25 47 12 0.6 0.3 30 42 0.6 0.061 0.033 7205C 25 52 15 1 0.6 31 46 1 0.099 0.054 7305C 25 62 17 1.1 0.6 32 55 1 0.18 0.098 7906C 30 47 9 0.3 0.15 32.5 44.5 1 0.04 0.022 7006C 30 55 13 1 0.6 36 49 1 0.089 0.048 7206C 30 62 16 1 0.6 36 56 1 0.15 0.083 7306C 30 72 19 1.1 0.6 37 65 1 0.27 0.14 7907C 35 55 10 0.6 0.3 40 50 0.6 0.058 0.031 7007C 35 62 14 1 0.6 41 56 1 0.12 0.063 7207C 35 72 17 1.1 0.6 42 65 1 0.22 0.12 7307C 35 80 21 1.5 1 44 71 1.5 0.36 0.19 7908C 40 62 12 0.6 0.3 45 57 0.6 0.09 0.05 7008C 40 68 15 1 0.6 46 62 1 0.15 0.08 7208C 40 80 18 1.1 0.6 47 73 1 0.28 0.15 7308C 40 90 23 1.5 1 49 81 1.5 0.49 0.27 7909C 45 68 12 0.6 0.3 50 63 0.6 0.097 0.053 7009C 45 75 16 1 0.6 51 69 1 0.19 0.1 7209C 45 85 19 1.1 0.6 52 78 1 0.32 0.175 7309C 45 100 25 1.5 1 54 91 1.5 0.64 0.345 7910C 50 72 12 0.6 0.3 55 67 0.6 0.1 0.06 7010C 50 80 16 1 0.6 56 74 1 0.2 0.11 7210C 50 90 20 1.1 0.6 57 83 1 0.35 0.19 7310C 50 110 27 2 1 60 100 2 0.82 0.44 7911C 55 80 13 1 0.6 61 74 1 0.15 0.08 7011C 55 90 18 1.1 0.6 62 83 1 0.29 0.16 7211C 55 100 21 1.5 1 64 91 1.5 0.48 0.26 7311C 55 120 29 2 1 65 110 2 1.05 0.57 7912C 60 85 13 1 0.6 66 79 1 0.15 0.08 7012C 60 95 18 1.1 0.6 67 88 1 0.32 0.17 7212C 60 110 22 1.5 1 69 101 1.5 0.6 0.33 7312C 60 130 31 2.1 1.1 72 118 2 1.32 0.72 7913C 65 90 13 1 0.6 71 84 1 0.17 0.09 7013C 65 100 18 1.1 0.6 72 93 1 0.34 0.18 7213C 65 120 23 1.5 1 74 111 1.5 0.77 0.42 7313C 65 140 33 2.1 1.1 77 128 2 1.62 0.88 7914C 70 100 16 1 0.6 76 94 1 0.27 0.15 7014C 70 110 20 1.1 0.6 77 103 1 0.47 0.25 7214C 70 125 24 1.5 1 79 116 1.5 0.84 0.45 7314C 70 150 35 2.1 1.1 82 138 2 1.98 1.07 7915C 75 105 16 1 0.6 81 99 1 0.28 0.15 7015C 75 115 20 1.1 0.6 82 108 1 0.5 0.27 7215C 75 130 25 1.5 1 84 121 1.5 0.92 0.5 7916C 80 110 16 1 0.6 86 104 1 0.3 0.16 7016C 80 125 22 1.1 0.6 87 118 1 0.67 0.36 7216C 80 140 26 2 1 90 130 2 1.09 0.59 7017C 85 130 22 1.1 0.6 92 123 1 0.71 0.38 7217C 85 150 28 2 1 95 140 2 1.35 0.73 7918C 90 125 18 1.1 0.6 97 118 1 0.45 0.24 7018C 90 140 24 1.5 1 99 131 1.5 0.92 0.5 7919C 95 130 18 1.1 0.6 102 123 1 0.46 0.25 7019C 95 145 24 1.5 1 104 136 1.5 0.95 0.51 7920C 100 140 20 1.1 0.6 107 133 1 0.64 0.35 7020C 100 150 24 1.5 1 109 141 1.5 0.99 0.54 7921C 105 145 20 1.1 0.6 112 138 1 0.66 0.36 7922C 110 150 20 1.1 0.6 117 143 1 0.69 0.37 Self-aligning Ball Bearings Designation Dimensions Mounting dimensions Weight d D B r min da da Da (kg)      (mm)        min max max ZrO2 Si3N4 126C 6 19 6 0.3 8 17 0.3 0.007 0.004 127C 7 22 7 0.3 9 20 0.3 0.011 0.006 108C 8 22 7 0.3 10 20 0.3 0.011 0.006 129C 9 26 8 0.6 13 22 0.6 0.017 0.009 1200C 10 30 9 0.6 14 26 0.6 0.026 0.014 2200C 10 30 14 0.6 14 26 0.6 0.036 0.019 1300C 10 25 11 0.6 14 31 0.6 0.045 0.024 2300C 10 25 17 0.6 14 31 0.6 0.065 0.035 1201C 12 32 10 0.6 16 28 0.6 0.031 0.016 2201C 12 32 14 0.6 16 28 0.6 0.041 0.022 1301C 12 37 12 1 17 32 1 0.052 0.027 2301C 12 37 17 1 17 32 1 0.073 0.039 1202C 15 35 11 0.6 19 31 0.6 0.038 0.02 2202C 15 35 14 0.6 19 31 0.6 0.046 0.025 1302C 15 42 13 1 20 37 1 0.072 0.039 2302C 15 42 17 1 20 37 1 0.088 0.047 1203C 17 40 12 0.6 21 36 0.6 0.056 0.03 2203C 17 40 16 0.6 21 36 0.6 0.068 0.036 1303C 17 47 14 1 22 42 1 0.1 0.053 2303C 17 47 19 1 22 42 1 0.12 0.065 1204C 20 47 14 1 25 42 1 0.09 0.049 2204C 20 47 18 1 25 42 1 0.11 0.057 1304C 20 52 15 1.1 26.5 45.5 1 0.13 0.067 1304C 20 52 21 1.1 26.5 45.5 1 0.16 0.086 1205C 25 52 15 1 30 47 1 0.11 0.058 2205C 25 52 18 1 30 47 1 0.13 0.067 1305C 25 62 17 1.1 31.5 55.5 1 0.2 0.11 2305C 25 62 24 1.1 31.5 55.5 1 0.26 0.14 1206C 30 62 16 1 35 57 1 0.17 0.09 2206C 30 62 20 1 35 57 1 0.2 0.11 1306C 30 72 19 1.1 36.5 65.5 1 0.3 0.16 2306C 30 72 27 1.1 36.5 65.5 1 0.38 0.21 1207C 35 72 17 1.1 41.5 65.5 1 0.25 0.13 2207C 35 72 23 1.1 41.5 65.5 1 0.31 0.17 1307C 35 80 21 1.5 43 72 1.5 0.39 0.21 2307C 35 80 31 1.5 43 72 1.5 0.52 0.28 1208C 40 80 18 1.1 46.5 73.5 1 0.32 0.17 2208C 40 80 23 1.1 46.5 73.5 1 0.39 0.21 1308C 40 90 23 1.5 48 82 1.5 0.55 0.29 2308C 40 90 33 1.5 48 82 1.5 0.71 0.38 1209C 45 85 19 1.1 51.5 78.5 1 0.36 0.19 2209C 45 85 23 1.1 51.5 78.5 1 0.42 0.22 1309C 45 100 25 1.5 53 92 1.5 0.74 0.39 2309C 45 100 36 1.5 53 92 1.5 0.95 0.5 1210C 50 90 20 1.1 56.5 83.5 1 0.4 0.22 2210C 50 90 23 1.1 56.5 83.5 1 0.45 0.24 1310C 50 110 27 2 59 101 2 0.93 0.5 2310C 50 110 40 2 59 101 2 1.26 0.67 1211C 55 100 21 1.5 63 92 1.5 0.54 0.29 2211C 55 100 25 1.5 63 92 1.5 0.62 0.33 1311C 55 120 29 2 64 111 2 1.22 0.65 2311C 55 120 43 2 64 111 2 1.62 0.86 1212C 60 110 22 1.5 68 102 1.5 0.69 0.37 2212C 60 110 28 1.5 68 102 1.5 0.84 0.45 1312C 60 130 31 2.1 71 119 2 1.51 0.8 2312C 60 130 46 2.1 71 119 2 2 1.07 1213C 65 120 23 1.5 73 112 1.5 0.88 0.47 2213C 65 120 31 1.5 73 112 1.5 1.12 0.6 1313C 65 140 33 2.1 76 129 2 1.88 1.01 2313C 65 140 48 2.1 76 129 2 2.48 1.33 1214C 70 125 24 1.5 78 117 1.5 0.97 0.52 2214C 70 125 31 1.5 78 117 1.5 1.17 0.62 1314C 70 150 35 2.1 81 139 2 2.3 1.23 2314C 70 150 51 2.1 81 139 2 3.25 1.74 1215C 75 130 25 1.5 83 122 1.5 1.05 0.56 2215C 75 130 31 1.5 83 122 1.5 1.25 0.66 1216C 80 140 26 2 89 131 2 1.28 0.69 2216C 80 140 33 2 89 131 2 1.55 0.82 1217C 85 150 28 2 94 141 2 1.59 0.85 2217C 85 150 36 2 94 141 2 1.94 1.03 Trust Ball Bearings Designation Dimensions Mounting dimensions Weight d D B r min d1 max D1 min (kg)      (mm)        ZrO2 Si3N4 51100C 10 24 9 0.3 24 11 0.015 0.0078 51200C 10 26 11 0.6 26 12 0.022 0.011 51101C 12 26 9 0.3 26 13 0.016 0.009 51201C 12 28 11 0.6 28 14 0.024 0.013 51102C 15 28 9 0.3 28 16 0.018 0.0094 51202C 15 32 12 0.6 32 17 0.033 0.018 51103C 17 30 9 0.3 30 18 0.019 0.01 51203C 17 35 12 0.6 35 19 0.038 0.021 51104C 20 35 10 0.3 35 21 0.028 0.015 51204C 20 40 14 0.6 40 22 0.059 0.032 51105C 25 42 11 0.6 42 26 0.043 0.023 51205C 25 47 15 0.6 47 27 0.085 0.046 51106C 30 47 11 0.6 47 32 0.049 0.026 51206C 30 52 16 0.6 52 32 0.11 0.056 51107C 35 52 12 0.6 52 37 0.062 0.033 51207C 35 62 18 1 62 37 0.16 0.086 51108C 40 60 13 0.6 60 42 0.092 0.049 51208C 40 68 19 1 68 42 0.21 0.11 51109C 45 65 14 0.6 65 47 0.11 0.059 51209C 45 73 20 1 73 47 0.24 0.13 51110C 50 70 14 0.6 70 52 0.12 0.063 51210C 50 78 22 1 78 52 0.29 0.16 51111C 55 78 16 0.6 78 57 0.17 0.093 51211C 55 90 25 1 90 57 0.46 0.25 51112C 60 85 17 1 85 62 0.22 0.12 51212C 60 95 26 1 95 62 0.52 0.28 51113C 65 90 18 1 90 67 0.25 0.13 51213C 65 100 27 1 100 67 0.58 0.31 51114C 70 95 18 1 95 72 0.27 0.14 51214C 70 105 27 1 105 72 0.61 0.33 51115C 75 100 19 1 100 77 0.3 0.16 51215C 75 110 27 1 110 77 0.65 0.35 51116C 80 105 19 1 105 82 0.32 0.17 51216C 80 115 28 1 115 82 0.72 0.38 51117C 85 110 19 1 110 87 0.34 0.18 51217C 85 125 31 1 125 88 0.94 0.5 51118C 90 120 22 1 120 92 0.5 0.27 51218C 90 135 35 1.1 135 93 1.3 0.69 51120C 100 135 25 1 135 102 0.74 0.39 51220C 100 150 38 1.1 150 103 1.73 0.92 51122C 110 145 25 1 145 112 0.8 0.43 51124C 120 155 25 1 155 122 0.86 0.46 Insert Ball Bearings Designation Dimensions Weight d D B S C r/min G ds (kg)      (mm)        ZrO2 Si3N4 UC201C 12 47 31 12.7 17 0.6 4.5 M6 x 1 0.16 0.09 UC202C 15 47 31 12.7 17 0.6 4.5 M6 x 1 0.15 0.08 UC203C 17 47 31 12.7 17 0.6 4.5 M6 x 1 0.14 0.07 UC204C 20 47 31 12.7 17 1 4.5 M6 x 1 0.12 0.07 UC205C 25 52 34.1 14.3 17V 1 5 M6 x 1 0.17 0.09 UC206C 30 62 38.1 15.9 19 1 5 M6 x 1 0.27 0.14 UC207C 35 72 42.9 17.5 20 1.1 6 M8 x 1 0.4 0.21 UC208C 40 80 49.2 19 21 1.1 8 M8 x 1 0.54 0.29 UC209C 45 85 49.2 19 22 1.1 8 M8 x 1 0.57 0.3 UC210C 50 90 51.6 19 24 1.1 9 M10 x 1 0.64 0.34 UC211C 55 100 55.6 22.2 25 1.5 9 M10 x 1 0.89 0.48 UC212C 60 110 65.1 25.4 27 1.5 10 M10 x 1 1.2 0.64 UC213C 65 120 65.1 25.4 27 1.5 10 M10 x 1 1.51 0.8 UC214C 70 125 74.6 30.2 29 1.5 12 M12 x 1.25 1.68 0.89 UC215C 75 130 77.8 33.3 30 1.5 12 M12 x 1.25 1.86 0.99 UC216C 80 140 82.6 33.3 33 2 14 M12 x 1.25 2.17 1.16 UC217C 85 150 85.7 34.1 36 2 14 M12 x 1.25 2.62 1.39 UC218C 90 160 96 39.7 37 2 14 M12 x 1.25 3.31 1.76 UC220C 100 180 108 42 41 2 14 M12 x 1.25 3.46 1.85

Silicon Nitride Ceramic Bearing

Product Description: High Temperature Ceramic Bearings. The endurable highest temperature is 1200 centigrade degree. Anti-corrosion. The material itself has corrosion-resistance speciality which could be applied to strong acid, strong alkali, mineral, organic salt, sea water and so on, for examples: Electroplating Apparatus, Electronic Equipment, Chemical Machinery, Shipbuilding, Medical Devices as so. Nonmagnetic Bearing: Nonmagnetic means no dust absorption which could reduce bearing wear in advance and lower bearing noise. Application examples such as demagnetizing apparatus, precise instrument field. Electrical Insulation bearing: Due to high electrical resistance could avoid electrical arc damage bearing which could be used in electronic equipment which insulation is needed. Deep Groove Ball Bearing Designation Dimensions Mounting dimensions (mm)   Weight d D B r min da da Da ra (kg)      (mm)        min max max max ZrO2 Si3N4 684CE 4 9 2.5 0.1 4.8 / 8.2 0.1 0.0005 0.0003 694CE 4 11 4 0.15 5.2 / 9.8 0.15 0.0013 0.0007 604CE 4 12 4 0.2 5.6 / 10.4 0.2 0.0017 0.0009 624CE 4 13 5 0.2 5.6 / 11.4 0.2 0.0023 0.0013 634CE 4 16 5 0.3 6 / 14 0.3 0.004 0.0022 685CE 5 11 3 0.15 6.2 / 9.8 0.15 0.0009 0.0005 695CE 5 13 4 0.2 6.6 / 11.4 0.2 0.0019 0.001 605CE 5 14 5 0.2 6.6 / 12.4 0.2 0.0027 0.0015 625CE 5 16 5 0.3 7 / 14 0.3 0.0038 0.0021 635CE 5 19 6 0.3 7 / 17 0.3 0.0066 0.0036 686CE 6 13 3.5 0.15 7.2 / 11.8 0.15 0.0015 0.0008 696CE 6 15 5 0.2 7.6 / 13.4 0.2 0.003 0.0016 606CE 6 17 6 0.3 8 / 15 0.3 0.0046 0.0025 626CE 6 19 6 0.3 8 / 17 0.3 0.0063 0.0034 636CE 6 22 7 0.3 8 / 20 0.3 0.0108 0.0058 687CE 7 14 3.5 0.15 8.2 / 12.8 0.15 0.0017 0.0009 697CE 7 17 5 0.3 9 / 15 0.3 0.004 0.0022 607CE 7 19 6 0.3 9 / 17 0.3 0.0059 0.0032 627CE 7 22 7 0.3 9 / 20 0.3 0.0098 0.0053 637CE 7 26 9 0.3 9 / 24 0.3 0.0185 0.01 688CE 8 16 4 0.2 9.6 / 14.4 0.2 0.0025 0.0014 698CE 8 19 6 0.3 10 / 17 0.3 0.0056 0.003 608CE 8 22 7 0.3 10 / 20 0.3 0.0093 0.005 628CE 8 24 8 0.3 10 / 22 0.3 0.013 0.0072 638CE 8 28 9 0.3 10 / 26 0.3 0.022 0.012 689CE 9 17 4 0.2 10.6 / 15.4 0.2 0.0027 0.0015 699CE 9 20 6 0.3 11 / 18 0.3 0.0065 0.0035 609CE 9 24 7 0.3 11 / 22 0.3 0.011 0.006 629CE 9 26 8 0.3 11 / 24 0.3 0.015 0.0081 639CE 9 30 10 0.6 13 / 26 0.6 0.028 0.015 6800CE 10 19 5 0.3 12 12 17 0.3 0.004 0.0021 6900CE 10 22 6 0.3 12 12.5 20 0.3 0.007 0.0038 6000CE 10 26 8 0.3 12 13 24 0.3 0.014 0.0075 6200CE 10 30 9 0.6 14 16 26 0.6 0.025 0.013 6300CE 10 35 11 0.6 14 16.5 31 0.6 0.04 0.022 6801CE 12 21 5 0.3 14 14 19 0.3 0.005 0.0025 6901CE 12 24 6 0.3 14 14.5 22 0.3 0.008 0.0042 16001CE 12 28 7 0.3 14 / 26 0.3 0.015 0.0079 6001CE 12 28 8 0.3 14 15.5 26 0.3 0.017 0.0092 6201CE 12 32 10 0.6 16 17 28 0.6 0.028 0.015 6301CE 12 37 12 1 17 18 32 1 0.046 0.025 6802CE 15 24 5 0.3 17 17 22 0.3 0.005 0.0029 6902CE 15 28 7 0.3 17 17 26 0.3 0.012 0.0063 16002CE 15 32 8 0.3 17 / 30 0.3 0.021 0.011 6002CE 15 32 9 0.3 17 19 30 0.3 0.024 0.013 6202CE 15 35 11 0.6 19 20.5 31 0.3 0.035 0.019 6302CE 15 42 13 1 20 22.5 37 1 0.064 0.035 6803CE 17 26 5 0.3 19 19 24 0.3 0.005 0.0029 6903CE 17 30 7 0.3 19 19.5 28 0.3 0.013 0.0071 16003CE 17 35 8 0.3 19 / 33 0.3 0.025 0.014 6003CE 17 35 10 0.3 19 21.5 33 0.3 0.032 0.017 6203CE 17 40 12 0.6 21 23.5 36 0.6 0.052 0.028 6303CE 17 47 14 1 22 25.5 42 1 0.087 0.047 6403CE 17 62 17 1.1 23.5 / 55.5 1 0.21 0.11 6804CE 20 32 7 0.3 22 22.5 30 0.3 0.013 0.007 6904CE 20 37 9 0.3 22 24 35 0.3 0.028 0.015 16004CE 20 42 8 0.3 22 / 40 0.3 0.037 0.02 6004CE 20 42 12 0.6 24 25.5 38 0.6 0.052 0.028 6204CE 20 47 14 1 25 26.5 42 1 0.082 0.045 6304CE 20 52 15 1.1 26.5 28 45.5 1 0.11 0.06 6404CE 20 72 19 1.1 26.5 / 65.5 1 0.31 0.17 6805CE 25 37 7 0.3 27 27 35 0.3 0.016 0.009 6905CE 25 42 9 0.3 27 28.5 40 0.3 0.032 0.018 16005CE 25 47 8 0.3 27 / 45 0.3 0.045 0.025 6005CE 25 47 12 0.6 29 30 43 0.6 0.061 0.033 6205CE 25 52 15 1 30 32 47 1 0.099 0.054 6305CE 25 62 17 1.1 31.5 36 55.5 1 0.18 0.098 6405CE 25 80 21 1.5 33 / 72 1.5 0.41 0.22 6806CE 30 42 7 0.3 32 32 50 1 0.018 0.01 6906CE 30 47 9 0.3 32 34 57 1 0.04 0.022 16006CE 30 55 9 0.3 32 42.5 65.5 1 0.067 0.036 6006CE 30 55 13 1 35 36.5 53 1 0.089 0.048 6206CE 30 62 16 1 35 38.5 60 1 0.15 0.083 6306CE 30 72 19 1.1 36.5 42.5 68.5 1 0.27 0.14 6406CE 30 90 23 1.5 54 / 82 2 0.57 0.31 6807CE 35 47 7 0.3 37 37 45 0.3 0.021 0.011 6907CE 35 55 10 0.6 39 39 51 0.6 0.058 0.031 16007CE 35 62 9 0.3 37 / 60 0.3 0.082 0.045 6007CE 35 62 14 1 40 41.5 57 1 0.12 0.063 6207CE 35 72 17 1.1 41.5 44.5 65.5 1 0.22 0.12 6307CE 35 80 21 1.5 43 47 72 1.5 0.36 0.19 6407CE 35 100 25 1.5 43 / 92 1.5 0.73 0.4 6808CE 40 52 7 0.3 42 42 50 0.3 0.02 0.013 6908CE 40 62 12 0.6 44 46 58 0.6 0.09 0.05 16008CE 40 68 9 0.3 42 / 66 0.3 0.1 0.05 6008CE 40 68 15 1 45 47.5 63 1 0.15 0.08 6208CE 40 80 18 1.1 46.5 50.5 73.5 1 0.28 0.15 6308CE 40 90 23 1.5 48 53 80 1.5 0.49 0.27 6408CE 40 110 27 2 49 / 101 2 0.946 0.513 6809CE 45 58 7 0.3 47 47.5 56 0.3 0.029 0.016 6909CE 45 68 12 0.6 49 50 64 0.6 0.097 0.053 16009CE 45 75 10 0.6 49 / 71 0.6 0.13 0.07 6009CE 45 75 16 1 50 53.5 70 1 0.19 0.1 6209CE 45 85 19 1.1 51.5 55.5 78.5 1 0.32 0.175 6309CE 45 100 25 1.5 53 61.5 92 1.5 0.64 0.345 6409CE 45 120 29 2 54 / 111 2 1.18 0.64 6810CE 50 65 7 0.3 52 52.5 63 0.3 0.038 0.021 6910CE 50 72 12 0.6 54 55 68 0.6 0.1 0.06 16010CE 50 80 10 0.6 54 / 76 0.6 0.13 0.07 6010CE 50 80 16 1 55 58.5 75 1 0.2 0.11 6210CE 50 90 20 1.1 56.5 60 83.2 1 0.35 0.19 6310CE 50 110 27 2 59 68 101 2 0.82 0.44 6410CE 50 130 31 2.1 61 / 119 2 1.45 0.78 6811CE 55 72 9 0.3 57 59 70 0.3 0.06 0.03 6911CE 55 80 13 1 60 61.5 75 1 0.15 0.08 16011CE 55 90 11 0.6 59 / 86 0.6 0.2 0.11 6011CE 55 90 18 1.1 61.5 64 83.5 1 0.29 0.16 6211CE 55 100 21 1.5 63 66.5 92 1.5 0.48 0.26 6311CE 55 120 29 2 64 72.5 111 2 1.05 0.57 6411CE 55 140 33 2.1 66 / 129 2 1.76 0.95 6812CE 60 78 10 0.3 62 64 76 0.3 0.08 0.04 6912CE 60 85 13 1 65 66 80 1 0.15 0.08 16012CE 60 95 11 0.6 64 / 91 0.6 0.22 0.12 6012CE 60 95 18 1.1 66.5 69 88.5 1 0.32 0.17 6212CE 60 110 22 1.5 68 74.5 102 1.5 0.6 0.33 6312CE 60 130 31 2.1 71 79 119 2 1.32 0.72 6412CE 60 150 35 2.1 71 139 2 2.13 1.15 6813CE 65 85 10 0.6 69 69 81 0.6 0.1 0.05 6913CE 65 90 13 1 70 71.5 85 1 0.17 0.09 16013CE 65 100 11 0.6 69 / 96 0.6 0.23 0.13 6013CE 65 100 18 1.1 71.5 73 93.5 1 0.34 0.18 6213CE 65 120 23 1.5 73 80 112 1.5 0.77 0.42 6313CE 65 140 33 2.1 76 85.5 129 2 1.62 0.88 6814CE 70 90 10 0.6 74 74.5 86 0.6 0.1 0.056 6914CE 70 100 16 1 75 77.5 95 1 0.27 0.15 16014CE 70 110 13 0.6 74 / 106 0.6 0.34 0.18 6014CE 70 110 20 1.1 76.5 80.5 103.5 1 0.47 0.25 6214CE 70 125 24 1.5 78 84 117 1.5 0.84 0.45 6314CE 70 150 35 2.1 81 92 139 2 1.98 1.07 6815CE 75 95 10 0.6 79 79.5 91 0.6 0.11 0.06 6915CE 75 105 16 1 80 82 100 1 0.28 0.15 16015CE 75 115 13 0.6 79 / 111 0.6 0.36 0.19 6015CE 75 115 20 1.1 81.5 85.5 108.5 1 0.5 0.27 6215CE 75 130 25 1.5 83 90 122 1.5 0.92 0.5 6816CE 80 100 10 0.6 84 84.5 96 0.6 0.12 0.063 6916CE 80 110 16 1 85 87.5 105 1 0.3 0.16 16016CE 80 125 14 0.6 84 / 121 0.6 0.48 0.26 6016CE 80 125 22 1.1 86.5 91 118.5 1 0.67 0.36 6216CE 80 140 26 2 89 95.5 131 2 1.09 0.59 6817CE 85 110 13 1 90 90.5 105 1 0.2 0.11 6917CE 85 120 18 1.1 91.5 94.5 113.5 1 0.42 0.23 16017CE 85 130 14 0.6 89 / 126 0.6 0.5 0.27 6017CE 85 130 22 1.1 91.5 96 123.5 1 0.71 0.38 6217CE 85 150 28 2 94 102 141 2 1.35 0.73 6818CE 90 115 13 1 95 95.5 110 1 0.21 0.12 6918CE 90 125 18 1.1 96.5 98.5 118.5 1 0.45 0.24 16018CE 90 140 16 1 95 / 135 1 0.67 0.36 6018CE 90 140 24 1.5 98 103 132 1.5 0.92 0.5 6819CE 95 120 13 1 100 102 115 1 0.23 0.12 6919CE 95 130 18 1.1 101.5 104 123.5 1 0.46 0.25 16019CE 95 145 16 1 100 / 140 1 0.7 0.38 6019CE 95 145 24 1.5 103 109 137 1.5 0.95 0.51 6820CE 100 125 13 1 105 106 120 1 0.24 0.13 6920CE 100 140 20 1.1 106.5 111 133.5 1 0.64 0.35 16020CE 100 150 16 1 105 / 145 1 0.73 0.39 6020CE 100 150 24 1.5 108 113 142 1.5 0.99 0.54 6821CE 105 130 13 1 110 111 125 1 0.25 0.14 6921CE 105 145 20 1.1 111.5 116 138.5 1 0.66 0.36 6822CE 110 140 16 1 115 117 135 1 0.38 0.21 6922CE 110 150 20 1.1 116.5 121 143.5 1 0.69 0.37 6824CE 120 150 16 1 125 127 145 1 0.41 0.22 Angular Contact Ball Bearings Designation Dimensions Mounting dimensions Weight d D B r min r1  min da Da ra (kg)      (mm)        min max max ZrO2 Si3N4 7900CE 10 22 6 0.3 0.15 12.5 19.5 0.3 0.007 0.0038 7000CE 10 26 8 0.3 0.15 12.5 23.5 0.3 0.014 0.0075 7200CE 10 30 9 0.6 0.3 15 25 0.6 0.025 0.013 7300CE 10 35 11 0.6 0.3 15 30 0.6 0.04 0.022 7901CE 12 24 6 0.3 0.15 14.5 21.5 0.3 0.008 0.0042 7001CE 12 28 8 0.3 0.15 14.5 25.5 0.3 0.017 0.0092 7201CE 12 32 10 0.6 0.3 17 27 0.6 0.028 0.015 7301CE 12 37 12 1 0.6 18 31 1 0.046 0.025 7902CE 15 28 7 0.3 0.15 17.5 25.5 0.3 0.012 0.0063 7002CE 15 32 9 0.3 0.15 17.5 29.5 0.3 0.024 0.013 7202CE 15 35 11 0.6 0.3 20 30 0.3 0.035 0.019 7302CE 15 42 13 1 0.6 21 36 1 0.064 0.035 7903CE 17 30 7 0.3 0.15 19.5 27.5 0.3 0.013 0.0071 7003CE 17 35 10 0.3 0.15 19.5 32.5 0.3 0.032 0.017 7203CE 17 40 12 0.6 0.3 22 35 0.6 0.052 0.028 7303CE 17 47 14 1 0.6 23 41 1 0.087 0.047 7904CE 20 37 9 0.3 0.15 22.5 34.5 0.3 0.028 0.015 7004CE 20 42 12 0.6 0.3 25 37 0.6 0.052 0.028 7204CE 20 47 14 1 0.6 26 41 1 0.082 0.045 7304CE 20 52 15 1.1 0.6 27 45 1 0.11 0.06 7905CE 25 42 9 0.3 0.15 27.5 39.5 0.3 0.032 0.018 7005CE 25 47 12 0.6 0.3 30 42 0.6 0.061 0.033 7205CE 25 52 15 1 0.6 31 46 1 0.099 0.054 7305CE 25 62 17 1.1 0.6 32 55 1 0.18 0.098 7906CE 30 47 9 0.3 0.15 32.5 44.5 1 0.04 0.022 7006CE 30 55 13 1 0.6 36 49 1 0.089 0.048 7206CE 30 62 16 1 0.6 36 56 1 0.15 0.083 7306CE 30 72 19 1.1 0.6 37 65 1 0.27 0.14 7907CE 35 55 10 0.6 0.3 40 50 0.6 0.058 0.031 7007CE 35 62 14 1 0.6 41 56 1 0.12 0.063 7207CE 35 72 17 1.1 0.6 42 65 1 0.22 0.12 7307CE 35 80 21 1.5 1 44 71 1.5 0.36 0.19 7908CE 40 62 12 0.6 0.3 45 57 0.6 0.09 0.05 7008CE 40 68 15 1 0.6 46 62 1 0.15 0.08 7208CE 40 80 18 1.1 0.6 47 73 1 0.28 0.15 7308CE 40 90 23 1.5 1 49 81 1.5 0.49 0.27 7909CE 45 68 12 0.6 0.3 50 63 0.6 0.097 0.053 7009CE 45 75 16 1 0.6 51 69 1 0.19 0.1 7209CE 45 85 19 1.1 0.6 52 78 1 0.32 0.175 7309CE 45 100 25 1.5 1 54 91 1.5 0.64 0.345 7910CE 50 72 12 0.6 0.3 55 67 0.6 0.1 0.06 7010CE 50 80 16 1 0.6 56 74 1 0.2 0.11 7210CE 50 90 20 1.1 0.6 57 83 1 0.35 0.19 7310CE 50 110 27 2 1 60 100 2 0.82 0.44 7911CE 55 80 13 1 0.6 61 74 1 0.15 0.08 7011CE 55 90 18 1.1 0.6 62 83 1 0.29 0.16 7211CE 55 100 21 1.5 1 64 91 1.5 0.48 0.26 7311CE 55 120 29 2 1 65 110 2 1.05 0.57 7912CE 60 85 13 1 0.6 66 79 1 0.15 0.08 7012CE 60 95 18 1.1 0.6 67 88 1 0.32 0.17 7212CE 60 110 22 1.5 1 69 101 1.5 0.6 0.33 7312CE 60 130 31 2.1 1.1 72 118 2 1.32 0.72 7913CE 65 90 13 1 0.6 71 84 1 0.17 0.09 7013CE 65 100 18 1.1 0.6 72 93 1 0.34 0.18 7213CE 65 120 23 1.5 1 74 111 1.5 0.77 0.42 7313CE 65 140 33 2.1 1.1 77 128 2 1.62 0.88 7914CE 70 100 16 1 0.6 76 94 1 0.27 0.15 7014CE 70 110 20 1.1 0.6 77 103 1 0.47 0.25 7214CE 70 125 24 1.5 1 79 116 1.5 0.84 0.45 7314CE 70 150 35 2.1 1.1 82 138 2 1.98 1.07 7915CE 75 105 16 1 0.6 81 99 1 0.28 0.15 7015CE 75 115 20 1.1 0.6 82 108 1 0.5 0.27 7215CE 75 130 25 1.5 1 84 121 1.5 0.92 0.5 7916CE 80 110 16 1 0.6 86 104 1 0.3 0.16 7016CE 80 125 22 1.1 0.6 87 118 1 0.67 0.36 7216CE 80 140 26 2 1 90 130 2 1.09 0.59 7017CE 85 130 22 1.1 0.6 92 123 1 0.71 0.38 7217CE 85 150 28 2 1 95 140 2 1.35 0.73 7918CE 90 125 18 1.1 0.6 97 118 1 0.45 0.24 7018CE 90 140 24 1.5 1 99 131 1.5 0.92 0.5 7919CE 95 130 18 1.1 0.6 102 123 1 0.46 0.25 7019CE 95 145 24 1.5 1 104 136 1.5 0.95 0.51 7920CE 100 140 20 1.1 0.6 107 133 1 0.64 0.35 7020CE 100 150 24 1.5 1 109 141 1.5 0.99 0.54 7921CE 105 145 20 1.1 0.6 112 138 1 0.66 0.36 7922CE 110 150 20 1.1 0.6 117 143 1 0.69 0.37 Self-aligning Ball Bearings Designation Dimensions Mounting dimensions Weight d D B r min da Da ra (kg)      (mm)        min max max ZrO2 Si3N4 135CE 5 19 6 0.3 7 17 0.3 0.007 0.004 126CE 6 19 6 0.3 8 17 0.3 0.007 0.004 127CE 7 22 7 0.3 9 20 0.3 0.011 0.006 108CE 8 22 7 0.3 10 20 0.3 0.011 0.006 129CE 9 26 8 0.6 13 22 0.6 0.017 0.009 1200CE 10 30 9 0.6 14 26 0.6 0.026 0.014 2200CE 10 30 14 0.6 14 26 0.6 0.036 0.019 1300CE 10 25 11 0.6 14 31 0.6 0.045 0.024 2300CE 10 25 17 0.6 14 31 0.6 0.065 0.035 1201CE 12 32 10 0.6 16 28 0.6 0.031 0.016 2201CE 12 32 14 0.6 16 28 0.6 0.041 0.022 1301CE 12 37 12 1 17 32 1 0.052 0.027 2301CE 12 37 17 1 17 32 1 0.073 0.039 1202CE 15 35 11 0.6 19 31 0.6 0.038 0.02 2202CE 15 35 14 0.6 19 31 0.6 0.046 0.025 1302CE 15 42 13 1 20 37 1 0.072 0.039 2302CE 15 42 17 1 20 37 1 0.088 0.047 1203CE 17 40 12 0.6 21 36 0.6 0.056 0.03 2203CE 17 40 16 0.6 21 36 0.6 0.068 0.036 1303CE 17 47 14 1 22 42 1 0.1 0.053 2303CE 17 47 19 1 22 42 1 0.12 0.065 1204CE 20 47 14 1 25 42 1 0.09 0.049 2204CE 20 47 18 1 25 42 1 0.11 0.057 1304CE 20 52 15 1.1 26.5 45.5 1 0.13 0.067 1304CE 20 52 21 1.1 26.5 45.5 1 0.16 0.086 1205CE 25 52 15 1 30 47 1 0.11 0.058 2205CE 25 52 18 1 30 47 1 0.13 0.067 1305CE 25 62 17 1.1 31.5 55.5 1 0.2 0.11 2305CE 25 62 24 1.1 31.5 55.5 1 0.26 0.14 1206CE 30 62 16 1 35 57 1 0.17 0.09 2206CE 30 62 20 1 35 57 1 0.2 0.11 1306CE 30 72 19 1.1 36.5 65.5 1 0.3 0.16 2306CE 30 72 27 1.1 36.5 65.5 1 0.38 0.21 1207CE 35 72 17 1.1 41.5 65.5 1 0.25 0.13 2207CE 35 72 23 1.1 41.5 65.5 1 0.31 0.17 1307CE 35 80 21 1.5 43 72 1.5 0.39 0.21 2307CE 35 80 31 1.5 43 72 1.5 0.52 0.28 1208CE 40 80 18 1.1 46.5 73.5 1 0.32 0.17 2208CE 40 80 23 1.1 46.5 73.5 1 0.39 0.21 1308CE 40 90 23 1.5 48 82 1.5 0.55 0.29 2308CE 40 90 33 1.5 48 82 1.5 0.71 0.38 1209CE 45 85 19 1.1 51.5 78.5 1 0.36 0.19 2209CE 45 85 23 1.1 51.5 78.5 1 0.42 0.22 1309CE 45 100 25 1.5 53 92 1.5 0.74 0.39 2309CE 45 100 36 1.5 53 92 1.5 0.95 0.5 1210CE 50 90 20 1.1 56.5 83.5 1 0.4 0.22 2210CE 50 90 23 1.1 56.5 83.5 1 0.45 0.24 1310CE 50 110 27 2 59 101 2 0.93 0.5 2310CE 50 110 40 2 59 101 2 1.26 0.67 1211CE 55 100 21 1.5 63 92 1.5 0.54 0.29 2211CE 55 100 25 1.5 63 92 1.5 0.62 0.33 1311CE 55 120 29 2 64 111 2 1.22 0.65 2311CE 55 120 43 2 64 111 2 1.62 0.86 1212CE 60 110 22 1.5 68 102 1.5 0.69 0.37 2212CE 60 110 28 1.5 68 102 1.5 0.84 0.45 1312CE 60 130 31 2.1 71 119 2 1.51 0.8 2312CE 60 130 46 2.1 71 119 2 2 1.07 1213CE 65 120 23 1.5 73 112 1.5 0.88 0.47 2213CE 65 120 31 1.5 73 112 1.5 1.12 0.6 1313CE 65 140 33 2.1 76 129 2 1.88 1.01 2313CE 65 140 48 2.1 76 129 2 2.48 1.33 1214CE 70 125 24 1.5 78 117 1.5 0.97 0.52 2214CE 70 125 31 1.5 78 117 1.5 1.17 0.62 1314CE 70 150 35 2.1 81 139 2 2.3 1.23 2314CE 70 150 51 2.1 81 139 2 3.25 1.74 1215CE 75 130 25 1.5 83 122 1.5 1.05 0.56 2215CE 75 130 31 1.5 83 122 1.5 1.25 0.66 1216CE 80 140 26 2 89 131 2 1.28 0.69 2216CE 80 140 33 2 89 131 2 1.55 0.82 1217CE 85 150 28 2 94 141 2 1.59 0.85 2217CE 85 150 36 2 94 141 2 1.94 1.03 Trust Ball Bearings Designation Dimensions Mounting dimensions Weight d D B r min d1 D1 (kg)      (mm)        min max ZrO2 Si3N4 51100CE 10 24 9 0.3 24 11 0.015 0.0078 51200CE 10 26 11 0.6 26 12 0.022 0.011 51101CE 12 26 9 0.3 26 13 0.016 0.009 51201CE 12 28 11 0.6 28 14 0.024 0.013 51102CE 15 28 9 0.3 28 16 0.018 0.0094 51202CE 15 32 12 0.6 32 17 0.033 0.018 51103CE 17 30 9 0.3 30 18 0.019 0.01 51203CE 17 35 12 0.6 35 19 0.038 0.021 51104CE 20 35 10 0.3 35 21 0.028 0.015 51204CE 20 40 14 0.6 40 22 0.059 0.032 51105CE 25 42 11 0.6 42 26 0.043 0.023 51205CE 25 47 15 0.6 47 27 0.085 0.046 51106CE 30 47 11 0.6 47 32 0.049 0.026 51206CE 30 52 16 0.6 52 32 0.11 0.056 51107CE 35 52 12 0.6 52 37 0.062 0.033 51207CE 35 62 18 1 62 37 0.16 0.086 51108CE 40 60 13 0.6 60 42 0.092 0.049 51208CE 40 68 19 1 68 42 0.21 0.11 51109CE 45 65 14 0.6 65 47 0.11 0.059 51209CE 45 73 20 1 73 47 0.24 0.13 51110CE 50 70 14 0.6 70 52 0.12 0.063 51210CE 50 78 22 1 78 52 0.29 0.16 51111CE 55 78 16 0.6 78 57 0.17 0.093 51211CE 55 90 25 1 90 57 0.46 0.25 51112CE 60 85 17 1 85 62 0.22 0.12 51212CE 60 95 26 1 95 62 0.52 0.28 51113CE 65 90 18 1 90 67 0.25 0.13 51213CE 65 100 27 1 100 67 0.58 0.31 51114CE 70 95 18 1 95 72 0.27 0.14 51214CE 70 105 27 1 105 72 0.61 0.33 51115CE 75 100 19 1 100 77 0.3 0.16 51215CE 75 110 27 1 110 77 0.65 0.35 51116CE 80 105 19 1 105 82 0.32 0.17 51216CE 80 115 28 1 115 82 0.72 0.38 51117CE 85 110 19 1 110 87 0.34 0.18 51217CE 85 125 31 1 125 88 0.94 0.5 51118CE 90 120 22 1 120 92 0.5 0.27 51218CE 90 135 35 1.1 135 93 1.3 0.69 51120CE 100 135 25 1 135 102 0.74 0.39 51220CE 100 150 38 1.1 150 103 1.73 0.92 51122CE 110 145 25 1 145 112 0.8 0.43 51124CE 120 155 25 1 155 122 0.86 0.46 Insert Ball Bearings Designation Dimensions Mounting dimensions Weight d D B S C r/min G ds (kg)      (mm)        ZrO2 Si3N4 UC201CE 12 47 31 12.7 17 0.6 4.5 M6 x 1 0.16 0.09 UC202CE 15 47 31 12.7 17 0.6 4.5 M6 x 1 0.15 0.08 UC203CE 17 47 31 12.7 17 0.6 4.5 M6 x 1 0.14 0.07 UC204CE 20 47 31 12.7 17 1 4.5 M6 x 1 0.12 0.07 UC205CE 25 52 34.1 14.3 17V 1 5 M6 x 1 0.17 0.09 UC206CE 30 62 38.1 15.9 19 1 5 M6 x 1 0.27 0.14 UC207CE 35 72 42.9 17.5 20 1.1 6 M8 x 1 0.4 0.21 UC208CE 40 80 49.2 19 21 1.1 8 M8 x 1 0.54 0.29 UC209CE 45 85 49.2 19 22 1.1 8 M8 x 1 0.57 0.3 UC210CE 50 90 51.6 19 24 1.1 9 M10 x 1 0.64 0.34 UC211CE 55 100 55.6 22.2 25 1.5 9 M10 x 1 0.89 0.48 UC212CE 60 110 65.1 25.4 27 1.5 10 M10 x 1 1.2 0.64 UC213CE 65 120 65.1 25.4 27 1.5 10 M10 x 1 1.51 0.8 UC214CE 70 125 74.6 30.2 29 1.5 12 M12 x 1.25 1.68 0.89 UC215CE 75 130 77.8 33.3 30 1.5 12 M12 x 1.25 1.86 0.99 UC216CE 80 140 82.6 33.3 33 2 14 M12 x 1.25 2.17 1.16 UC217CE 85 150 85.7 34.1 36 2 14 M12 x 1.25 2.62 1.39 UC218CE 90 160 96 39.7 37 2 14 M12 x 1.25 3.31 1.76 UC220CE 100 180 108 42 41 2 14 M12 x 1.25 3.46 1.85

Zirconia Ceramic Ball Bearing Series

Product Description: ZrO2 Zirconia Ceramic Bearings have the strongest toughness and strength which is non-toxic. Low cost as well. ZrO2 main application is in medicine mold, also apply for petroleum valve ball. ZrO2 is the best material for structural components which is easy to machining and is the most precision. Deep Groove Ball Bearing Designation Dimensions Mounting dimensions (mm)   Weight d D B r min da da Da ra (kg)      (mm)        min max max max ZrO2 Si3N4 684CE 4 9 2.5 0.1 4.8 / 8.2 0.1 0.0005 0.0003 694CE 4 11 4 0.15 5.2 / 9.8 0.15 0.0013 0.0007 604CE 4 12 4 0.2 5.6 / 10.4 0.2 0.0017 0.0009 624CE 4 13 5 0.2 5.6 / 11.4 0.2 0.0023 0.0013 634CE 4 16 5 0.3 6 / 14 0.3 0.004 0.0022 685CE 5 11 3 0.15 6.2 / 9.8 0.15 0.0009 0.0005 695CE 5 13 4 0.2 6.6 / 11.4 0.2 0.0019 0.001 605CE 5 14 5 0.2 6.6 / 12.4 0.2 0.0027 0.0015 625CE 5 16 5 0.3 7 / 14 0.3 0.0038 0.0021 635CE 5 19 6 0.3 7 / 17 0.3 0.0066 0.0036 686CE 6 13 3.5 0.15 7.2 / 11.8 0.15 0.0015 0.0008 696CE 6 15 5 0.2 7.6 / 13.4 0.2 0.003 0.0016 606CE 6 17 6 0.3 8 / 15 0.3 0.0046 0.0025 626CE 6 19 6 0.3 8 / 17 0.3 0.0063 0.0034 636CE 6 22 7 0.3 8 / 20 0.3 0.0108 0.0058 687CE 7 14 3.5 0.15 8.2 / 12.8 0.15 0.0017 0.0009 697CE 7 17 5 0.3 9 / 15 0.3 0.004 0.0022 607CE 7 19 6 0.3 9 / 17 0.3 0.0059 0.0032 627CE 7 22 7 0.3 9 / 20 0.3 0.0098 0.0053 637CE 7 26 9 0.3 9 / 24 0.3 0.0185 0.01 688CE 8 16 4 0.2 9.6 / 14.4 0.2 0.0025 0.0014 698CE 8 19 6 0.3 10 / 17 0.3 0.0056 0.003 608CE 8 22 7 0.3 10 / 20 0.3 0.0093 0.005 628CE 8 24 8 0.3 10 / 22 0.3 0.013 0.0072 638CE 8 28 9 0.3 10 / 26 0.3 0.022 0.012 689CE 9 17 4 0.2 10.6 / 15.4 0.2 0.0027 0.0015 699CE 9 20 6 0.3 11 / 18 0.3 0.0065 0.0035 609CE 9 24 7 0.3 11 / 22 0.3 0.011 0.006 629CE 9 26 8 0.3 11 / 24 0.3 0.015 0.0081 639CE 9 30 10 0.6 13 / 26 0.6 0.028 0.015 6800CE 10 19 5 0.3 12 12 17 0.3 0.004 0.0021 6900CE 10 22 6 0.3 12 12.5 20 0.3 0.007 0.0038 6000CE 10 26 8 0.3 12 13 24 0.3 0.014 0.0075 6200CE 10 30 9 0.6 14 16 26 0.6 0.025 0.013 6300CE 10 35 11 0.6 14 16.5 31 0.6 0.04 0.022 6801CE 12 21 5 0.3 14 14 19 0.3 0.005 0.0025 6901CE 12 24 6 0.3 14 14.5 22 0.3 0.008 0.0042 16001CE 12 28 7 0.3 14 / 26 0.3 0.015 0.0079 6001CE 12 28 8 0.3 14 15.5 26 0.3 0.017 0.0092 6201CE 12 32 10 0.6 16 17 28 0.6 0.028 0.015 6301CE 12 37 12 1 17 18 32 1 0.046 0.025 6802CE 15 24 5 0.3 17 17 22 0.3 0.005 0.0029 6902CE 15 28 7 0.3 17 17 26 0.3 0.012 0.0063 16002CE 15 32 8 0.3 17 / 30 0.3 0.021 0.011 6002CE 15 32 9 0.3 17 19 30 0.3 0.024 0.013 6202CE 15 35 11 0.6 19 20.5 31 0.3 0.035 0.019 6302CE 15 42 13 1 20 22.5 37 1 0.064 0.035 6803CE 17 26 5 0.3 19 19 24 0.3 0.005 0.0029 6903CE 17 30 7 0.3 19 19.5 28 0.3 0.013 0.0071 16003CE 17 35 8 0.3 19 / 33 0.3 0.025 0.014 6003CE 17 35 10 0.3 19 21.5 33 0.3 0.032 0.017 6203CE 17 40 12 0.6 21 23.5 36 0.6 0.052 0.028 6303CE 17 47 14 1 22 25.5 42 1 0.087 0.047 6403CE 17 62 17 1.1 23.5 / 55.5 1 0.21 0.11 6804CE 20 32 7 0.3 22 22.5 30 0.3 0.013 0.007 6904CE 20 37 9 0.3 22 24 35 0.3 0.028 0.015 16004CE 20 42 8 0.3 22 / 40 0.3 0.037 0.02 6004CE 20 42 12 0.6 24 25.5 38 0.6 0.052 0.028 6204CE 20 47 14 1 25 26.5 42 1 0.082 0.045 6304CE 20 52 15 1.1 26.5 28 45.5 1 0.11 0.06 6404CE 20 72 19 1.1 26.5 / 65.5 1 0.31 0.17 6805CE 25 37 7 0.3 27 27 35 0.3 0.016 0.009 6905CE 25 42 9 0.3 27 28.5 40 0.3 0.032 0.018 16005CE 25 47 8 0.3 27 / 45 0.3 0.045 0.025 6005CE 25 47 12 0.6 29 30 43 0.6 0.061 0.033 6205CE 25 52 15 1 30 32 47 1 0.099 0.054 6305CE 25 62 17 1.1 31.5 36 55.5 1 0.18 0.098 6405CE 25 80 21 1.5 33 / 72 1.5 0.41 0.22 6806CE 30 42 7 0.3 32 32 50 1 0.018 0.01 6906CE 30 47 9 0.3 32 34 57 1 0.04 0.022 16006CE 30 55 9 0.3 32 42.5 65.5 1 0.067 0.036 6006CE 30 55 13 1 35 36.5 53 1 0.089 0.048 6206CE 30 62 16 1 35 38.5 60 1 0.15 0.083 6306CE 30 72 19 1.1 36.5 42.5 68.5 1 0.27 0.14 6406CE 30 90 23 1.5 54 / 82 2 0.57 0.31 6807CE 35 47 7 0.3 37 37 45 0.3 0.021 0.011 6907CE 35 55 10 0.6 39 39 51 0.6 0.058 0.031 16007CE 35 62 9 0.3 37 / 60 0.3 0.082 0.045 6007CE 35 62 14 1 40 41.5 57 1 0.12 0.063 6207CE 35 72 17 1.1 41.5 44.5 65.5 1 0.22 0.12 6307CE 35 80 21 1.5 43 47 72 1.5 0.36 0.19 6407CE 35 100 25 1.5 43 / 92 1.5 0.73 0.4 6808CE 40 52 7 0.3 42 42 50 0.3 0.02 0.013 6908CE 40 62 12 0.6 44 46 58 0.6 0.09 0.05 16008CE 40 68 9 0.3 42 / 66 0.3 0.1 0.05 6008CE 40 68 15 1 45 47.5 63 1 0.15 0.08 6208CE 40 80 18 1.1 46.5 50.5 73.5 1 0.28 0.15 6308CE 40 90 23 1.5 48 53 80 1.5 0.49 0.27 6408CE 40 110 27 2 49 / 101 2 0.946 0.513 6809CE 45 58 7 0.3 47 47.5 56 0.3 0.029 0.016 6909CE 45 68 12 0.6 49 50 64 0.6 0.097 0.053 16009CE 45 75 10 0.6 49 / 71 0.6 0.13 0.07 6009CE 45 75 16 1 50 53.5 70 1 0.19 0.1 6209CE 45 85 19 1.1 51.5 55.5 78.5 1 0.32 0.175 6309CE 45 100 25 1.5 53 61.5 92 1.5 0.64 0.345 6409CE 45 120 29 2 54 / 111 2 1.18 0.64 6810CE 50 65 7 0.3 52 52.5 63 0.3 0.038 0.021 6910CE 50 72 12 0.6 54 55 68 0.6 0.1 0.06 16010CE 50 80 10 0.6 54 / 76 0.6 0.13 0.07 6010CE 50 80 16 1 55 58.5 75 1 0.2 0.11 6210CE 50 90 20 1.1 56.5 60 83.2 1 0.35 0.19 6310CE 50 110 27 2 59 68 101 2 0.82 0.44 6410CE 50 130 31 2.1 61 / 119 2 1.45 0.78 6811CE 55 72 9 0.3 57 59 70 0.3 0.06 0.03 6911CE 55 80 13 1 60 61.5 75 1 0.15 0.08 16011CE 55 90 11 0.6 59 / 86 0.6 0.2 0.11 6011CE 55 90 18 1.1 61.5 64 83.5 1 0.29 0.16 6211CE 55 100 21 1.5 63 66.5 92 1.5 0.48 0.26 6311CE 55 120 29 2 64 72.5 111 2 1.05 0.57 6411CE 55 140 33 2.1 66 / 129 2 1.76 0.95 6812CE 60 78 10 0.3 62 64 76 0.3 0.08 0.04 6912CE 60 85 13 1 65 66 80 1 0.15 0.08 16012CE 60 95 11 0.6 64 / 91 0.6 0.22 0.12 6012CE 60 95 18 1.1 66.5 69 88.5 1 0.32 0.17 6212CE 60 110 22 1.5 68 74.5 102 1.5 0.6 0.33 6312CE 60 130 31 2.1 71 79 119 2 1.32 0.72 6412CE 60 150 35 2.1 71 139 2 2.13 1.15 6813CE 65 85 10 0.6 69 69 81 0.6 0.1 0.05 6913CE 65 90 13 1 70 71.5 85 1 0.17 0.09 16013CE 65 100 11 0.6 69 / 96 0.6 0.23 0.13 6013CE 65 100 18 1.1 71.5 73 93.5 1 0.34 0.18 6213CE 65 120 23 1.5 73 80 112 1.5 0.77 0.42 6313CE 65 140 33 2.1 76 85.5 129 2 1.62 0.88 6814CE 70 90 10 0.6 74 74.5 86 0.6 0.1 0.056 6914CE 70 100 16 1 75 77.5 95 1 0.27 0.15 16014CE 70 110 13 0.6 74 / 106 0.6 0.34 0.18 6014CE 70 110 20 1.1 76.5 80.5 103.5 1 0.47 0.25 6214CE 70 125 24 1.5 78 84 117 1.5 0.84 0.45 6314CE 70 150 35 2.1 81 92 139 2 1.98 1.07 6815CE 75 95 10 0.6 79 79.5 91 0.6 0.11 0.06 6915CE 75 105 16 1 80 82 100 1 0.28 0.15 16015CE 75 115 13 0.6 79 / 111 0.6 0.36 0.19 6015CE 75 115 20 1.1 81.5 85.5 108.5 1 0.5 0.27 6215CE 75 130 25 1.5 83 90 122 1.5 0.92 0.5 6816CE 80 100 10 0.6 84 84.5 96 0.6 0.12 0.063 6916CE 80 110 16 1 85 87.5 105 1 0.3 0.16 16016CE 80 125 14 0.6 84 / 121 0.6 0.48 0.26 6016CE 80 125 22 1.1 86.5 91 118.5 1 0.67 0.36 6216CE 80 140 26 2 89 95.5 131 2 1.09 0.59 6817CE 85 110 13 1 90 90.5 105 1 0.2 0.11 6917CE 85 120 18 1.1 91.5 94.5 113.5 1 0.42 0.23 16017CE 85 130 14 0.6 89 / 126 0.6 0.5 0.27 6017CE 85 130 22 1.1 91.5 96 123.5 1 0.71 0.38 6217CE 85 150 28 2 94 102 141 2 1.35 0.73 6818CE 90 115 13 1 95 95.5 110 1 0.21 0.12 6918CE 90 125 18 1.1 96.5 98.5 118.5 1 0.45 0.24 16018CE 90 140 16 1 95 / 135 1 0.67 0.36 6018CE 90 140 24 1.5 98 103 132 1.5 0.92 0.5 6819CE 95 120 13 1 100 102 115 1 0.23 0.12 6919CE 95 130 18 1.1 101.5 104 123.5 1 0.46 0.25 16019CE 95 145 16 1 100 / 140 1 0.7 0.38 6019CE 95 145 24 1.5 103 109 137 1.5 0.95 0.51 6820CE 100 125 13 1 105 106 120 1 0.24 0.13 6920CE 100 140 20 1.1 106.5 111 133.5 1 0.64 0.35 16020CE 100 150 16 1 105 / 145 1 0.73 0.39 6020CE 100 150 24 1.5 108 113 142 1.5 0.99 0.54 6821CE 105 130 13 1 110 111 125 1 0.25 0.14 6921CE 105 145 20 1.1 111.5 116 138.5 1 0.66 0.36 6822CE 110 140 16 1 115 117 135 1 0.38 0.21 6922CE 110 150 20 1.1 116.5 121 143.5 1 0.69 0.37 6824CE 120 150 16 1 125 127 145 1 0.41 0.22 Angular Contact Ball Bearings Designation Dimensions Mounting dimensions Weight d D B r min r1  min da Da ra (kg)      (mm)        min max max ZrO2 Si3N4 7900CE 10 22 6 0.3 0.15 12.5 19.5 0.3 0.007 0.0038 7000CE 10 26 8 0.3 0.15 12.5 23.5 0.3 0.014 0.0075 7200CE 10 30 9 0.6 0.3 15 25 0.6 0.025 0.013 7300CE 10 35 11 0.6 0.3 15 30 0.6 0.04 0.022 7901CE 12 24 6 0.3 0.15 14.5 21.5 0.3 0.008 0.0042 7001CE 12 28 8 0.3 0.15 14.5 25.5 0.3 0.017 0.0092 7201CE 12 32 10 0.6 0.3 17 27 0.6 0.028 0.015 7301CE 12 37 12 1 0.6 18 31 1 0.046 0.025 7902CE 15 28 7 0.3 0.15 17.5 25.5 0.3 0.012 0.0063 7002CE 15 32 9 0.3 0.15 17.5 29.5 0.3 0.024 0.013 7202CE 15 35 11 0.6 0.3 20 30 0.3 0.035 0.019 7302CE 15 42 13 1 0.6 21 36 1 0.064 0.035 7903CE 17 30 7 0.3 0.15 19.5 27.5 0.3 0.013 0.0071 7003CE 17 35 10 0.3 0.15 19.5 32.5 0.3 0.032 0.017 7203CE 17 40 12 0.6 0.3 22 35 0.6 0.052 0.028 7303CE 17 47 14 1 0.6 23 41 1 0.087 0.047 7904CE 20 37 9 0.3 0.15 22.5 34.5 0.3 0.028 0.015 7004CE 20 42 12 0.6 0.3 25 37 0.6 0.052 0.028 7204CE 20 47 14 1 0.6 26 41 1 0.082 0.045 7304CE 20 52 15 1.1 0.6 27 45 1 0.11 0.06 7905CE 25 42 9 0.3 0.15 27.5 39.5 0.3 0.032 0.018 7005CE 25 47 12 0.6 0.3 30 42 0.6 0.061 0.033 7205CE 25 52 15 1 0.6 31 46 1 0.099 0.054 7305CE 25 62 17 1.1 0.6 32 55 1 0.18 0.098 7906CE 30 47 9 0.3 0.15 32.5 44.5 1 0.04 0.022 7006CE 30 55 13 1 0.6 36 49 1 0.089 0.048 7206CE 30 62 16 1 0.6 36 56 1 0.15 0.083 7306CE 30 72 19 1.1 0.6 37 65 1 0.27 0.14 7907CE 35 55 10 0.6 0.3 40 50 0.6 0.058 0.031 7007CE 35 62 14 1 0.6 41 56 1 0.12 0.063 7207CE 35 72 17 1.1 0.6 42 65 1 0.22 0.12 7307CE 35 80 21 1.5 1 44 71 1.5 0.36 0.19 7908CE 40 62 12 0.6 0.3 45 57 0.6 0.09 0.05 7008CE 40 68 15 1 0.6 46 62 1 0.15 0.08 7208CE 40 80 18 1.1 0.6 47 73 1 0.28 0.15 7308CE 40 90 23 1.5 1 49 81 1.5 0.49 0.27 7909CE 45 68 12 0.6 0.3 50 63 0.6 0.097 0.053 7009CE 45 75 16 1 0.6 51 69 1 0.19 0.1 7209CE 45 85 19 1.1 0.6 52 78 1 0.32 0.175 7309CE 45 100 25 1.5 1 54 91 1.5 0.64 0.345 7910CE 50 72 12 0.6 0.3 55 67 0.6 0.1 0.06 7010CE 50 80 16 1 0.6 56 74 1 0.2 0.11 7210CE 50 90 20 1.1 0.6 57 83 1 0.35 0.19 7310CE 50 110 27 2 1 60 100 2 0.82 0.44 7911CE 55 80 13 1 0.6 61 74 1 0.15 0.08 7011CE 55 90 18 1.1 0.6 62 83 1 0.29 0.16 7211CE 55 100 21 1.5 1 64 91 1.5 0.48 0.26 7311CE 55 120 29 2 1 65 110 2 1.05 0.57 7912CE 60 85 13 1 0.6 66 79 1 0.15 0.08 7012CE 60 95 18 1.1 0.6 67 88 1 0.32 0.17 7212CE 60 110 22 1.5 1 69 101 1.5 0.6 0.33 7312CE 60 130 31 2.1 1.1 72 118 2 1.32 0.72 7913CE 65 90 13 1 0.6 71 84 1 0.17 0.09 7013CE 65 100 18 1.1 0.6 72 93 1 0.34 0.18 7213CE 65 120 23 1.5 1 74 111 1.5 0.77 0.42 7313CE 65 140 33 2.1 1.1 77 128 2 1.62 0.88 7914CE 70 100 16 1 0.6 76 94 1 0.27 0.15 7014CE 70 110 20 1.1 0.6 77 103 1 0.47 0.25 7214CE 70 125 24 1.5 1 79 116 1.5 0.84 0.45 7314CE 70 150 35 2.1 1.1 82 138 2 1.98 1.07 7915CE 75 105 16 1 0.6 81 99 1 0.28 0.15 7015CE 75 115 20 1.1 0.6 82 108 1 0.5 0.27 7215CE 75 130 25 1.5 1 84 121 1.5 0.92 0.5 7916CE 80 110 16 1 0.6 86 104 1 0.3 0.16 7016CE 80 125 22 1.1 0.6 87 118 1 0.67 0.36 7216CE 80 140 26 2 1 90 130 2 1.09 0.59 7017CE 85 130 22 1.1 0.6 92 123 1 0.71 0.38 7217CE 85 150 28 2 1 95 140 2 1.35 0.73 7918CE 90 125 18 1.1 0.6 97 118 1 0.45 0.24 7018CE 90 140 24 1.5 1 99 131 1.5 0.92 0.5 7919CE 95 130 18 1.1 0.6 102 123 1 0.46 0.25 7019CE 95 145 24 1.5 1 104 136 1.5 0.95 0.51 7920CE 100 140 20 1.1 0.6 107 133 1 0.64 0.35 7020CE 100 150 24 1.5 1 109 141 1.5 0.99 0.54 7921CE 105 145 20 1.1 0.6 112 138 1 0.66 0.36 7922CE 110 150 20 1.1 0.6 117 143 1 0.69 0.37 Self-aligning Ball Bearings Designation Dimensions Mounting dimensions Weight d D B r min da Da ra (kg)      (mm)        min max max ZrO2 Si3N4 135CE 5 19 6 0.3 7 17 0.3 0.007 0.004 126CE 6 19 6 0.3 8 17 0.3 0.007 0.004 127CE 7 22 7 0.3 9 20 0.3 0.011 0.006 108CE 8 22 7 0.3 10 20 0.3 0.011 0.006 129CE 9 26 8 0.6 13 22 0.6 0.017 0.009 1200CE 10 30 9 0.6 14 26 0.6 0.026 0.014 2200CE 10 30 14 0.6 14 26 0.6 0.036 0.019 1300CE 10 25 11 0.6 14 31 0.6 0.045 0.024 2300CE 10 25 17 0.6 14 31 0.6 0.065 0.035 1201CE 12 32 10 0.6 16 28 0.6 0.031 0.016 2201CE 12 32 14 0.6 16 28 0.6 0.041 0.022 1301CE 12 37 12 1 17 32 1 0.052 0.027 2301CE 12 37 17 1 17 32 1 0.073 0.039 1202CE 15 35 11 0.6 19 31 0.6 0.038 0.02 2202CE 15 35 14 0.6 19 31 0.6 0.046 0.025 1302CE 15 42 13 1 20 37 1 0.072 0.039 2302CE 15 42 17 1 20 37 1 0.088 0.047 1203CE 17 40 12 0.6 21 36 0.6 0.056 0.03 2203CE 17 40 16 0.6 21 36 0.6 0.068 0.036 1303CE 17 47 14 1 22 42 1 0.1 0.053 2303CE 17 47 19 1 22 42 1 0.12 0.065 1204CE 20 47 14 1 25 42 1 0.09 0.049 2204CE 20 47 18 1 25 42 1 0.11 0.057 1304CE 20 52 15 1.1 26.5 45.5 1 0.13 0.067 1304CE 20 52 21 1.1 26.5 45.5 1 0.16 0.086 1205CE 25 52 15 1 30 47 1 0.11 0.058 2205CE 25 52 18 1 30 47 1 0.13 0.067 1305CE 25 62 17 1.1 31.5 55.5 1 0.2 0.11 2305CE 25 62 24 1.1 31.5 55.5 1 0.26 0.14 1206CE 30 62 16 1 35 57 1 0.17 0.09 2206CE 30 62 20 1 35 57 1 0.2 0.11 1306CE 30 72 19 1.1 36.5 65.5 1 0.3 0.16 2306CE 30 72 27 1.1 36.5 65.5 1 0.38 0.21 1207CE 35 72 17 1.1 41.5 65.5 1 0.25 0.13 2207CE 35 72 23 1.1 41.5 65.5 1 0.31 0.17 1307CE 35 80 21 1.5 43 72 1.5 0.39 0.21 2307CE 35 80 31 1.5 43 72 1.5 0.52 0.28 1208CE 40 80 18 1.1 46.5 73.5 1 0.32 0.17 2208CE 40 80 23 1.1 46.5 73.5 1 0.39 0.21 1308CE 40 90 23 1.5 48 82 1.5 0.55 0.29 2308CE 40 90 33 1.5 48 82 1.5 0.71 0.38 1209CE 45 85 19 1.1 51.5 78.5 1 0.36 0.19 2209CE 45 85 23 1.1 51.5 78.5 1 0.42 0.22 1309CE 45 100 25 1.5 53 92 1.5 0.74 0.39 2309CE 45 100 36 1.5 53 92 1.5 0.95 0.5 1210CE 50 90 20 1.1 56.5 83.5 1 0.4 0.22 2210CE 50 90 23 1.1 56.5 83.5 1 0.45 0.24 1310CE 50 110 27 2 59 101 2 0.93 0.5 2310CE 50 110 40 2 59 101 2 1.26 0.67 1211CE 55 100 21 1.5 63 92 1.5 0.54 0.29 2211CE 55 100 25 1.5 63 92 1.5 0.62 0.33 1311CE 55 120 29 2 64 111 2 1.22 0.65 2311CE 55 120 43 2 64 111 2 1.62 0.86 1212CE 60 110 22 1.5 68 102 1.5 0.69 0.37 2212CE 60 110 28 1.5 68 102 1.5 0.84 0.45 1312CE 60 130 31 2.1 71 119 2 1.51 0.8 2312CE 60 130 46 2.1 71 119 2 2 1.07 1213CE 65 120 23 1.5 73 112 1.5 0.88 0.47 2213CE 65 120 31 1.5 73 112 1.5 1.12 0.6 1313CE 65 140 33 2.1 76 129 2 1.88 1.01 2313CE 65 140 48 2.1 76 129 2 2.48 1.33 1214CE 70 125 24 1.5 78 117 1.5 0.97 0.52 2214CE 70 125 31 1.5 78 117 1.5 1.17 0.62 1314CE 70 150 35 2.1 81 139 2 2.3 1.23 2314CE 70 150 51 2.1 81 139 2 3.25 1.74 1215CE 75 130 25 1.5 83 122 1.5 1.05 0.56 2215CE 75 130 31 1.5 83 122 1.5 1.25 0.66 1216CE 80 140 26 2 89 131 2 1.28 0.69 2216CE 80 140 33 2 89 131 2 1.55 0.82 1217CE 85 150 28 2 94 141 2 1.59 0.85 2217CE 85 150 36 2 94 141 2 1.94 1.03 Trust Ball Bearings Designation Dimensions Mounting dimensions Weight d D B r min d1 D1 (kg)      (mm)        min max ZrO2 Si3N4 51100CE 10 24 9 0.3 24 11 0.015 0.0078 51200CE 10 26 11 0.6 26 12 0.022 0.011 51101CE 12 26 9 0.3 26 13 0.016 0.009 51201CE 12 28 11 0.6 28 14 0.024 0.013 51102CE 15 28 9 0.3 28 16 0.018 0.0094 51202CE 15 32 12 0.6 32 17 0.033 0.018 51103CE 17 30 9 0.3 30 18 0.019 0.01 51203CE 17 35 12 0.6 35 19 0.038 0.021 51104CE 20 35 10 0.3 35 21 0.028 0.015 51204CE 20 40 14 0.6 40 22 0.059 0.032 51105CE 25 42 11 0.6 42 26 0.043 0.023 51205CE 25 47 15 0.6 47 27 0.085 0.046 51106CE 30 47 11 0.6 47 32 0.049 0.026 51206CE 30 52 16 0.6 52 32 0.11 0.056 51107CE 35 52 12 0.6 52 37 0.062 0.033 51207CE 35 62 18 1 62 37 0.16 0.086 51108CE 40 60 13 0.6 60 42 0.092 0.049 51208CE 40 68 19 1 68 42 0.21 0.11 51109CE 45 65 14 0.6 65 47 0.11 0.059 51209CE 45 73 20 1 73 47 0.24 0.13 51110CE 50 70 14 0.6 70 52 0.12 0.063 51210CE 50 78 22 1 78 52 0.29 0.16 51111CE 55 78 16 0.6 78 57 0.17 0.093 51211CE 55 90 25 1 90 57 0.46 0.25 51112CE 60 85 17 1 85 62 0.22 0.12 51212CE 60 95 26 1 95 62 0.52 0.28 51113CE 65 90 18 1 90 67 0.25 0.13 51213CE 65 100 27 1 100 67 0.58 0.31 51114CE 70 95 18 1 95 72 0.27 0.14 51214CE 70 105 27 1 105 72 0.61 0.33 51115CE 75 100 19 1 100 77 0.3 0.16 51215CE 75 110 27 1 110 77 0.65 0.35 51116CE 80 105 19 1 105 82 0.32 0.17 51216CE 80 115 28 1 115 82 0.72 0.38 51117CE 85 110 19 1 110 87 0.34 0.18 51217CE 85 125 31 1 125 88 0.94 0.5 51118CE 90 120 22 1 120 92 0.5 0.27 51218CE 90 135 35 1.1 135 93 1.3 0.69 51120CE 100 135 25 1 135 102 0.74 0.39 51220CE 100 150 38 1.1 150 103 1.73 0.92 51122CE 110 145 25 1 145 112 0.8 0.43 51124CE 120 155 25 1 155 122 0.86 0.46 Insert Ball Bearings Designation Dimensions Mounting dimensions (mm)   Weight d D B S C r/min G ds (kg)      (mm)        ZrO2 Si3N4 UC201CE 12 47 31 12.7 17 0.6 4.5 M6 x 1 0.16 0.09 UC202CE 15 47 31 12.7 17 0.6 4.5 M6 x 1 0.15 0.08 UC203CE 17 47 31 12.7 17 0.6 4.5 M6 x 1 0.14 0.07 UC204CE 20 47 31 12.7 17 1 4.5 M6 x 1 0.12 0.07 UC205CE 25 52 34.1 14.3 17V 1 5 M6 x 1 0.17 0.09 UC206CE 30 62 38.1 15.9 19 1 5 M6 x 1 0.27 0.14 UC207CE 35 72 42.9 17.5 20 1.1 6 M8 x 1 0.4 0.21 UC208CE 40 80 49.2 19 21 1.1 8 M8 x 1 0.54 0.29 UC209CE 45 85 49.2 19 22 1.1 8 M8 x 1 0.57 0.3 UC210CE 50 90 51.6 19 24 1.1 9 M10 x 1 0.64 0.34 UC211CE 55 100 55.6 22.2 25 1.5 9 M10 x 1 0.89 0.48 UC212CE 60 110 65.1 25.4 27 1.5 10 M10 x 1 1.2 0.64 UC213CE 65 120 65.1 25.4 27 1.5 10 M10 x 1 1.51 0.8 UC214CE 70 125 74.6 30.2 29 1.5 12 M12 x 1.25 1.68 0.89 UC215CE 75 130 77.8 33.3 30 1.5 12 M12 x 1.25 1.86 0.99 UC216CE 80 140 82.6 33.3 33 2 14 M12 x 1.25 2.17 1.16 UC217CE 85 150 85.7 34.1 36 2 14 M12 x 1.25 2.62 1.39 UC218CE 90 160 96 39.7 37 2 14 M12 x 1.25 3.31 1.76 UC220CE 100 180 108 42 41 2 14 M12 x 1.25 3.46 1.85

Full Ceramic Ball Bearings

Product Description: There are two kinds of ceramic bearing: hybrid ceramic bearing and full ceramic bearing. The rolling elements of hybrid ceramic ball bearing are made in ceramic material, the races are made in chrome steel; Different ceramic material have different properties, here is the introduction of ceramic materials and their properties. therefore, for full ceramic ball bearing, both rolling elements and races are made in ceramic material. Ceramic Ball Bearings Because ceramic is a glass like surface it has an extremely low coefficient of friction and is ideal for applications seeking to reduce friction. Ceramic balls require less lubricant and have a greater hardness than steel balls which will contribute to increased bearing life. Thermal properties are better than steel balls resulting in less heat generation at high speeds. Full Ceramic Ball Bearings can have a retainer or full complement of balls, retainer materials used are PEEk and PTFE. Deep Groove Ball Bearing Designation Dimensions Mounting dimensions (mm)   Weight d D B r min da da Da ra (kg)      (mm)        min max max max ZrO2 Si3N4 684CEF 4 9 2.5 0.1 4.8 / 8.2 0.1 0.0005 0.0003 694CEF 4 11 4 0.15 5.2 / 9.8 0.15 0.0013 0.0007 604CEF 4 12 4 0.2 5.6 / 10.4 0.2 0.0017 0.0009 624CEF 4 13 5 0.2 5.6 / 11.4 0.2 0.0023 0.0013 634CEF 4 16 5 0.3 6 / 14 0.3 0.004 0.0022 685CEF 5 11 3 0.15 6.2 / 9.8 0.15 0.0009 0.0005 695CEF 5 13 4 0.2 6.6 / 11.4 0.2 0.0019 0.001 605CEF 5 14 5 0.2 6.6 / 12.4 0.2 0.0027 0.0015 625CEF 5 16 5 0.3 7 / 14 0.3 0.0038 0.0021 635CEF 5 19 6 0.3 7 / 17 0.3 0.0066 0.0036 686CEF 6 13 3.5 0.15 7.2 / 11.8 0.15 0.0015 0.0008 696CEF 6 15 5 0.2 7.6 / 13.4 0.2 0.003 0.0016 606CEF 6 17 6 0.3 8 / 15 0.3 0.0046 0.0025 626CEF 6 19 6 0.3 8 / 17 0.3 0.0063 0.0034 636CEF 6 22 7 0.3 8 / 20 0.3 0.0108 0.0058 687CEF 7 14 3.5 0.15 8.2 / 12.8 0.15 0.0017 0.0009 697CEF 7 17 5 0.3 9 / 15 0.3 0.004 0.0022 607CEF 7 19 6 0.3 9 / 17 0.3 0.0059 0.0032 627CEF 7 22 7 0.3 9 / 20 0.3 0.0098 0.0053 637CEF 7 26 9 0.3 9 / 24 0.3 0.0185 0.01 688CEF 8 16 4 0.2 9.6 / 14.4 0.2 0.0025 0.0014 698CEF 8 19 6 0.3 10 / 17 0.3 0.0056 0.003 608CEF 8 22 7 0.3 10 / 20 0.3 0.0093 0.005 628CEF 8 24 8 0.3 10 / 22 0.3 0.013 0.0072 638CEF 8 28 9 0.3 10 / 26 0.3 0.022 0.012 689CEF 9 17 4 0.2 10.6 / 15.4 0.2 0.0027 0.0015 699CEF 9 20 6 0.3 11 / 18 0.3 0.0065 0.0035 609CEF 9 24 7 0.3 11 / 22 0.3 0.011 0.006 629CEF 9 26 8 0.3 11 / 24 0.3 0.015 0.0081 639CEF 9 30 10 0.6 13 / 26 0.6 0.028 0.015 6800CEF 10 19 5 0.3 12 12 17 0.3 0.004 0.0021 6900CEF 10 22 6 0.3 12 12.5 20 0.3 0.007 0.0038 6000CEF 10 26 8 0.3 12 13 24 0.3 0.014 0.0075 6200CEF 10 30 9 0.6 14 16 26 0.6 0.025 0.013 6300CEF 10 35 11 0.6 14 16.5 31 0.6 0.04 0.022 6801CEF 12 21 5 0.3 14 14 19 0.3 0.005 0.0025 6901CEF 12 24 6 0.3 14 14.5 22 0.3 0.008 0.0042 16001CEF 12 28 7 0.3 14 / 26 0.3 0.015 0.0079 6001CEF 12 28 8 0.3 14 15.5 26 0.3 0.017 0.0092 6201CEF 12 32 10 0.6 16 17 28 0.6 0.028 0.015 6301CEF 12 37 12 1 17 18 32 1 0.046 0.025 6802CEF 15 24 5 0.3 17 17 22 0.3 0.005 0.0029 6902CEF 15 28 7 0.3 17 17 26 0.3 0.012 0.0063 16002CEF 15 32 8 0.3 17 / 30 0.3 0.021 0.011 6002CEF 15 32 9 0.3 17 19 30 0.3 0.024 0.013 6202CEF 15 35 11 0.6 19 20.5 31 0.3 0.035 0.019 6302CEF 15 42 13 1 20 22.5 37 1 0.064 0.035 6803CEF 17 26 5 0.3 19 19 24 0.3 0.005 0.0029 6903CEF 17 30 7 0.3 19 19.5 28 0.3 0.013 0.0071 16003CEF 17 35 8 0.3 19 / 33 0.3 0.025 0.014 6003CEF 17 35 10 0.3 19 21.5 33 0.3 0.032 0.017 6203CEF 17 40 12 0.6 21 23.5 36 0.6 0.052 0.028 6303CEF 17 47 14 1 22 25.5 42 1 0.087 0.047 6403CEF 17 62 17 1.1 23.5 / 55.5 1 0.21 0.11 6804CEF 20 32 7 0.3 22 22.5 30 0.3 0.013 0.007 6904CEF 20 37 9 0.3 22 24 35 0.3 0.028 0.015 16004CEF 20 42 8 0.3 22 / 40 0.3 0.037 0.02 6004CEF 20 42 12 0.6 24 25.5 38 0.6 0.052 0.028 6204CEF 20 47 14 1 25 26.5 42 1 0.082 0.045 6304CEF 20 52 15 1.1 26.5 28 45.5 1 0.11 0.06 6404CEF 20 72 19 1.1 26.5 / 65.5 1 0.31 0.17 6805CEF 25 37 7 0.3 27 27 35 0.3 0.016 0.009 6905CEF 25 42 9 0.3 27 28.5 40 0.3 0.032 0.018 16005CEF 25 47 8 0.3 27 / 45 0.3 0.045 0.025 6005CEF 25 47 12 0.6 29 30 43 0.6 0.061 0.033 6205CEF 25 52 15 1 30 32 47 1 0.099 0.054 6305CEF 25 62 17 1.1 31.5 36 55.5 1 0.18 0.098 6405CEF 25 80 21 1.5 33 / 72 1.5 0.41 0.22 6806CEF 30 42 7 0.3 32 32 50 1 0.018 0.01 6906CEF 30 47 9 0.3 32 34 57 1 0.04 0.022 16006CEF 30 55 9 0.3 32 42.5 65.5 1 0.067 0.036 6006CEF 30 55 13 1 35 36.5 53 1 0.089 0.048 6206CEF 30 62 16 1 35 38.5 60 1 0.15 0.083 6306CEF 30 72 19 1.1 36.5 42.5 68.5 1 0.27 0.14 6406CEF 30 90 23 1.5 54 / 82 2 0.57 0.31 6807CEF 35 47 7 0.3 37 37 45 0.3 0.021 0.011 6907CEF 35 55 10 0.6 39 39 51 0.6 0.058 0.031 16007CEF 35 62 9 0.3 37 / 60 0.3 0.082 0.045 6007CEF 35 62 14 1 40 41.5 57 1 0.12 0.063 6207CEF 35 72 17 1.1 41.5 44.5 65.5 1 0.22 0.12 6307CEF 35 80 21 1.5 43 47 72 1.5 0.36 0.19 6407CEF 35 100 25 1.5 43 / 92 1.5 0.73 0.4 6808CEF 40 52 7 0.3 42 42 50 0.3 0.02 0.013 6908CEF 40 62 12 0.6 44 46 58 0.6 0.09 0.05 16008CEF 40 68 9 0.3 42 / 66 0.3 0.1 0.05 6008CEF 40 68 15 1 45 47.5 63 1 0.15 0.08 6208CEF 40 80 18 1.1 46.5 50.5 73.5 1 0.28 0.15 6308CEF 40 90 23 1.5 48 53 80 1.5 0.49 0.27 6408CEF 40 110 27 2 49 / 101 2 0.946 0.513 6809CEF 45 58 7 0.3 47 47.5 56 0.3 0.029 0.016 6909CEF 45 68 12 0.6 49 50 64 0.6 0.097 0.053 16009CEF 45 75 10 0.6 49 / 71 0.6 0.13 0.07 6009CEF 45 75 16 1 50 53.5 70 1 0.19 0.1 6209CEF 45 85 19 1.1 51.5 55.5 78.5 1 0.32 0.175 6309CEF 45 100 25 1.5 53 61.5 92 1.5 0.64 0.345 6409CEF 45 120 29 2 54 / 111 2 1.18 0.64 6810CEF 50 65 7 0.3 52 52.5 63 0.3 0.038 0.021 6910CEF 50 72 12 0.6 54 55 68 0.6 0.1 0.06 16010CEF 50 80 10 0.6 54 / 76 0.6 0.13 0.07 6010CEF 50 80 16 1 55 58.5 75 1 0.2 0.11 6210CEF 50 90 20 1.1 56.5 60 83.2 1 0.35 0.19 6310CEF 50 110 27 2 59 68 101 2 0.82 0.44 6410CEF 50 130 31 2.1 61 / 119 2 1.45 0.78 6811CEF 55 72 9 0.3 57 59 70 0.3 0.06 0.03 6911CEF 55 80 13 1 60 61.5 75 1 0.15 0.08 16011CEF 55 90 11 0.6 59 / 86 0.6 0.2 0.11 6011CEF 55 90 18 1.1 61.5 64 83.5 1 0.29 0.16 6211CEF 55 100 21 1.5 63 66.5 92 1.5 0.48 0.26 6311CEF 55 120 29 2 64 72.5 111 2 1.05 0.57 6411CEF 55 140 33 2.1 66 / 129 2 1.76 0.95 6812CEF 60 78 10 0.3 62 64 76 0.3 0.08 0.04 6912CEF 60 85 13 1 65 66 80 1 0.15 0.08 16012CEF 60 95 11 0.6 64 / 91 0.6 0.22 0.12 6012CEF 60 95 18 1.1 66.5 69 88.5 1 0.32 0.17 6212CEF 60 110 22 1.5 68 74.5 102 1.5 0.6 0.33 6312CEF 60 130 31 2.1 71 79 119 2 1.32 0.72 6412CEF 60 150 35 2.1 71 139 2 2.13 1.15 6813CEF 65 85 10 0.6 69 69 81 0.6 0.1 0.05 6913CEF 65 90 13 1 70 71.5 85 1 0.17 0.09 16013CEF 65 100 11 0.6 69 / 96 0.6 0.23 0.13 6013CEF 65 100 18 1.1 71.5 73 93.5 1 0.34 0.18 6213CEF 65 120 23 1.5 73 80 112 1.5 0.77 0.42 6313CEF 65 140 33 2.1 76 85.5 129 2 1.62 0.88 6814CEF 70 90 10 0.6 74 74.5 86 0.6 0.1 0.056 6914CEF 70 100 16 1 75 77.5 95 1 0.27 0.15 16014CEF 70 110 13 0.6 74 / 106 0.6 0.34 0.18 6014CEF 70 110 20 1.1 76.5 80.5 103.5 1 0.47 0.25 6214CEF 70 125 24 1.5 78 84 117 1.5 0.84 0.45 6314CEF 70 150 35 2.1 81 92 139 2 1.98 1.07 6815CEF 75 95 10 0.6 79 79.5 91 0.6 0.11 0.06 6915CEF 75 105 16 1 80 82 100 1 0.28 0.15 16015CEF 75 115 13 0.6 79 / 111 0.6 0.36 0.19 6015CEF 75 115 20 1.1 81.5 85.5 108.5 1 0.5 0.27 6215CEF 75 130 25 1.5 83 90 122 1.5 0.92 0.5 6816CEF 80 100 10 0.6 84 84.5 96 0.6 0.12 0.063 6916CEF 80 110 16 1 85 87.5 105 1 0.3 0.16 16016CEF 80 125 14 0.6 84 / 121 0.6 0.48 0.26 6016CEF 80 125 22 1.1 86.5 91 118.5 1 0.67 0.36 6216CEF 80 140 26 2 89 95.5 131 2 1.09 0.59 6817CEF 85 110 13 1 90 90.5 105 1 0.2 0.11 6917CEF 85 120 18 1.1 91.5 94.5 113.5 1 0.42 0.23 16017CEF 85 130 14 0.6 89 / 126 0.6 0.5 0.27 6017CEF 85 130 22 1.1 91.5 96 123.5 1 0.71 0.38 6217CEF 85 150 28 2 94 102 141 2 1.35 0.73 6818CEF 90 115 13 1 95 95.5 110 1 0.21 0.12 6918CEF 90 125 18 1.1 96.5 98.5 118.5 1 0.45 0.24 16018CEF 90 140 16 1 95 / 135 1 0.67 0.36 6018CEF 90 140 24 1.5 98 103 132 1.5 0.92 0.5 6819CEF 95 120 13 1 100 102 115 1 0.23 0.12 6919CEF 95 130 18 1.1 101.5 104 123.5 1 0.46 0.25 16019CEF 95 145 16 1 100 / 140 1 0.7 0.38 6019CEF 95 145 24 1.5 103 109 137 1.5 0.95 0.51 6820CEF 100 125 13 1 105 106 120 1 0.24 0.13 6920CEF 100 140 20 1.1 106.5 111 133.5 1 0.64 0.35 16020CEF 100 150 16 1 105 / 145 1 0.73 0.39 6020CEF 100 150 24 1.5 108 113 142 1.5 0.99 0.54 6821CEF 105 130 13 1 110 111 125 1 0.25 0.14 6921CEF 105 145 20 1.1 111.5 116 138.5 1 0.66 0.36 6822CEF 110 140 16 1 115 117 135 1 0.38 0.21 6922CEF 110 150 20 1.1 116.5 121 143.5 1 0.69 0.37 6824CEF 120 150 16 1 125 127 145 1 0.41 0.22 Angular Contact Ball Bearings Designation Dimensions Mounting dimensions (mm)   Weight d D B r min r1  min da Da ra (kg)      (mm)        min max max ZrO2 Si3N4 7900CEF 10 22 6 0.3 0.15 12.5 19.5 0.3 0.007 0.0038 7000CEF 10 26 8 0.3 0.15 12.5 23.5 0.3 0.014 0.0075 7200CEF 10 30 9 0.6 0.3 15 25 0.6 0.025 0.013 7300CEF 10 35 11 0.6 0.3 15 30 0.6 0.04 0.022 7901CEF 12 24 6 0.3 0.15 14.5 21.5 0.3 0.008 0.0042 7001CEF 12 28 8 0.3 0.15 14.5 25.5 0.3 0.017 0.0092 7201CEF 12 32 10 0.6 0.3 17 27 0.6 0.028 0.015 7301CEF 12 37 12 1 0.6 18 31 1 0.046 0.025 7902CEF 15 28 7 0.3 0.15 17.5 25.5 0.3 0.012 0.0063 7002CEF 15 32 9 0.3 0.15 17.5 29.5 0.3 0.024 0.013 7202CEF 15 35 11 0.6 0.3 20 30 0.3 0.035 0.019 7302CEF 15 42 13 1 0.6 21 36 1 0.064 0.035 7903CEF 17 30 7 0.3 0.15 19.5 27.5 0.3 0.013 0.0071 7003CEF 17 35 10 0.3 0.15 19.5 32.5 0.3 0.032 0.017 7203CEF 17 40 12 0.6 0.3 22 35 0.6 0.052 0.028 7303CEF 17 47 14 1 0.6 23 41 1 0.087 0.047 7904CEF 20 37 9 0.3 0.15 22.5 34.5 0.3 0.028 0.015 7004CEF 20 42 12 0.6 0.3 25 37 0.6 0.052 0.028 7204CEF 20 47 14 1 0.6 26 41 1 0.082 0.045 7304CEF 20 52 15 1.1 0.6 27 45 1 0.11 0.06 7905CEF 25 42 9 0.3 0.15 27.5 39.5 0.3 0.032 0.018 7005CEF 25 47 12 0.6 0.3 30 42 0.6 0.061 0.033 7205CEF 25 52 15 1 0.6 31 46 1 0.099 0.054 7305CEF 25 62 17 1.1 0.6 32 55 1 0.18 0.098 7906CEF 30 47 9 0.3 0.15 32.5 44.5 1 0.04 0.022 7006CEF 30 55 13 1 0.6 36 49 1 0.089 0.048 7206CEF 30 62 16 1 0.6 36 56 1 0.15 0.083 7306CEF 30 72 19 1.1 0.6 37 65 1 0.27 0.14 7907CEF 35 55 10 0.6 0.3 40 50 0.6 0.058 0.031 7007CEF 35 62 14 1 0.6 41 56 1 0.12 0.063 7207CEF 35 72 17 1.1 0.6 42 65 1 0.22 0.12 7307CEF 35 80 21 1.5 1 44 71 1.5 0.36 0.19 7908CEF 40 62 12 0.6 0.3 45 57 0.6 0.09 0.05 7008CEF 40 68 15 1 0.6 46 62 1 0.15 0.08 7208CEF 40 80 18 1.1 0.6 47 73 1 0.28 0.15 7308CEF 40 90 23 1.5 1 49 81 1.5 0.49 0.27 7909CEF 45 68 12 0.6 0.3 50 63 0.6 0.097 0.053 7009CEF 45 75 16 1 0.6 51 69 1 0.19 0.1 7209CEF 45 85 19 1.1 0.6 52 78 1 0.32 0.175 7309CEF 45 100 25 1.5 1 54 91 1.5 0.64 0.345 7910CEF 50 72 12 0.6 0.3 55 67 0.6 0.1 0.06 7010CEF 50 80 16 1 0.6 56 74 1 0.2 0.11 7210CEF 50 90 20 1.1 0.6 57 83 1 0.35 0.19 7310CEF 50 110 27 2 1 60 100 2 0.82 0.44 7911CEF 55 80 13 1 0.6 61 74 1 0.15 0.08 7011CEF 55 90 18 1.1 0.6 62 83 1 0.29 0.16 7211CEF 55 100 21 1.5 1 64 91 1.5 0.48 0.26 7311CEF 55 120 29 2 1 65 110 2 1.05 0.57 7912CEF 60 85 13 1 0.6 66 79 1 0.15 0.08 7012CEF 60 95 18 1.1 0.6 67 88 1 0.32 0.17 7212CEF 60 110 22 1.5 1 69 101 1.5 0.6 0.33 7312CEF 60 130 31 2.1 1.1 72 118 2 1.32 0.72 7913CEF 65 90 13 1 0.6 71 84 1 0.17 0.09 7013CEF 65 100 18 1.1 0.6 72 93 1 0.34 0.18 7213CEF 65 120 23 1.5 1 74 111 1.5 0.77 0.42 7313CEF 65 140 33 2.1 1.1 77 128 2 1.62 0.88 7914CEF 70 100 16 1 0.6 76 94 1 0.27 0.15 7014CEF 70 110 20 1.1 0.6 77 103 1 0.47 0.25 7214CEF 70 125 24 1.5 1 79 116 1.5 0.84 0.45 7314CEF 70 150 35 2.1 1.1 82 138 2 1.98 1.07 7915CEF 75 105 16 1 0.6 81 99 1 0.28 0.15 7015CEF 75 115 20 1.1 0.6 82 108 1 0.5 0.27 7215CEF 75 130 25 1.5 1 84 121 1.5 0.92 0.5 7916CEF 80 110 16 1 0.6 86 104 1 0.3 0.16 7016CEF 80 125 22 1.1 0.6 87 118 1 0.67 0.36 7216CEF 80 140 26 2 1 90 130 2 1.09 0.59 7017CEF 85 130 22 1.1 0.6 92 123 1 0.71 0.38 7217CEF 85 150 28 2 1 95 140 2 1.35 0.73 7918CEF 90 125 18 1.1 0.6 97 118 1 0.45 0.24 7018CEF 90 140 24 1.5 1 99 131 1.5 0.92 0.5 7919CEF 95 130 18 1.1 0.6 102 123 1 0.46 0.25 7019CEF 95 145 24 1.5 1 104 136 1.5 0.95 0.51 7920CEF 100 140 20 1.1 0.6 107 133 1 0.64 0.35 7020CEF 100 150 24 1.5 1 109 141 1.5 0.99 0.54 7921CEF 105 145 20 1.1 0.6 112 138 1 0.66 0.36 7922CEF 110 150 20 1.1 0.6 117 143 1 0.69 0.37 Self-aligning Ball Bearings Designation Dimensions Mounting dimensions Weight d D B r min da Da ra (kg)      (mm)        min max max ZrO2 Si3N4 135CEF 5 19 6 0.3 7 17 0.3 0.007 0.004 126CEF 6 19 6 0.3 8 17 0.3 0.007 0.004 127CEF 7 22 7 0.3 9 20 0.3 0.011 0.006 108CEF 8 22 7 0.3 10 20 0.3 0.011 0.006 129CEF 9 26 8 0.6 13 22 0.6 0.017 0.009 1200CEF 10 30 9 0.6 14 26 0.6 0.026 0.014 2200CEF 10 30 14 0.6 14 26 0.6 0.036 0.019 1300CEF 10 25 11 0.6 14 31 0.6 0.045 0.024 2300CEF 10 25 17 0.6 14 31 0.6 0.065 0.035 1201CEF 12 32 10 0.6 16 28 0.6 0.031 0.016 2201CEF 12 32 14 0.6 16 28 0.6 0.041 0.022 1301CEF 12 37 12 1 17 32 1 0.052 0.027 2301CEF 12 37 17 1 17 32 1 0.073 0.039 1202CEF 15 35 11 0.6 19 31 0.6 0.038 0.02 2202CEF 15 35 14 0.6 19 31 0.6 0.046 0.025 1302CEF 15 42 13 1 20 37 1 0.072 0.039 2302CEF 15 42 17 1 20 37 1 0.088 0.047 1203CEF 17 40 12 0.6 21 36 0.6 0.056 0.03 2203CEF 17 40 16 0.6 21 36 0.6 0.068 0.036 1303CEF 17 47 14 1 22 42 1 0.1 0.053 2303CEF 17 47 19 1 22 42 1 0.12 0.065 1204CEF 20 47 14 1 25 42 1 0.09 0.049 2204CEF 20 47 18 1 25 42 1 0.11 0.057 1304CEF 20 52 15 1.1 26.5 45.5 1 0.13 0.067 1304CEF 20 52 21 1.1 26.5 45.5 1 0.16 0.086 1205CEF 25 52 15 1 30 47 1 0.11 0.058 2205CEF 25 52 18 1 30 47 1 0.13 0.067 1305CEF 25 62 17 1.1 31.5 55.5 1 0.2 0.11 2305CEF 25 62 24 1.1 31.5 55.5 1 0.26 0.14 1206CEF 30 62 16 1 35 57 1 0.17 0.09 2206CEF 30 62 20 1 35 57 1 0.2 0.11 1306CEF 30 72 19 1.1 36.5 65.5 1 0.3 0.16 2306CEF 30 72 27 1.1 36.5 65.5 1 0.38 0.21 1207CEF 35 72 17 1.1 41.5 65.5 1 0.25 0.13 2207CEF 35 72 23 1.1 41.5 65.5 1 0.31 0.17 1307CEF 35 80 21 1.5 43 72 1.5 0.39 0.21 2307CEF 35 80 31 1.5 43 72 1.5 0.52 0.28 1208CEF 40 80 18 1.1 46.5 73.5 1 0.32 0.17 2208CEF 40 80 23 1.1 46.5 73.5 1 0.39 0.21 1308CEF 40 90 23 1.5 48 82 1.5 0.55 0.29 2308CEF 40 90 33 1.5 48 82 1.5 0.71 0.38 1209CEF 45 85 19 1.1 51.5 78.5 1 0.36 0.19 2209CEF 45 85 23 1.1 51.5 78.5 1 0.42 0.22 1309CEF 45 100 25 1.5 53 92 1.5 0.74 0.39 2309CEF 45 100 36 1.5 53 92 1.5 0.95 0.5 1210CEF 50 90 20 1.1 56.5 83.5 1 0.4 0.22 2210CEF 50 90 23 1.1 56.5 83.5 1 0.45 0.24 1310CEF 50 110 27 2 59 101 2 0.93 0.5 2310CEF 50 110 40 2 59 101 2 1.26 0.67 1211CEF 55 100 21 1.5 63 92 1.5 0.54 0.29 2211CEF 55 100 25 1.5 63 92 1.5 0.62 0.33 1311CEF 55 120 29 2 64 111 2 1.22 0.65 2311CEF 55 120 43 2 64 111 2 1.62 0.86 1212CEF 60 110 22 1.5 68 102 1.5 0.69 0.37 2212CEF 60 110 28 1.5 68 102 1.5 0.84 0.45 1312CEF 60 130 31 2.1 71 119 2 1.51 0.8 2312CEF 60 130 46 2.1 71 119 2 2 1.07 1213CEF 65 120 23 1.5 73 112 1.5 0.88 0.47 2213CEF 65 120 31 1.5 73 112 1.5 1.12 0.6 1313CEF 65 140 33 2.1 76 129 2 1.88 1.01 2313CEF 65 140 48 2.1 76 129 2 2.48 1.33 1214CEF 70 125 24 1.5 78 117 1.5 0.97 0.52 2214CEF 70 125 31 1.5 78 117 1.5 1.17 0.62 1314CEF 70 150 35 2.1 81 139 2 2.3 1.23 2314CEF 70 150 51 2.1 81 139 2 3.25 1.74 1215CEF 75 130 25 1.5 83 122 1.5 1.05 0.56 2215CEF 75 130 31 1.5 83 122 1.5 1.25 0.66 1216CEF 80 140 26 2 89 131 2 1.28 0.69 2216CEF 80 140 33 2 89 131 2 1.55 0.82 1217CEF 85 150 28 2 94 141 2 1.59 0.85 2217CEF 85 150 36 2 94 141 2 1.94 1.03 Trust Ball Bearings Designation Dimensions Mounting dimensions Weight d D B r min d1 D1 (kg)      (mm)        min max ZrO2 Si3N4 51100CEF 10 24 9 0.3 24 11 0.015 0.0078 51200CEF 10 26 11 0.6 26 12 0.022 0.011 51101CEF 12 26 9 0.3 26 13 0.016 0.009 51201CEF 12 28 11 0.6 28 14 0.024 0.013 51102CEF 15 28 9 0.3 28 16 0.018 0.0094 51202CEF 15 32 12 0.6 32 17 0.033 0.018 51103CEF 17 30 9 0.3 30 18 0.019 0.01 51203CEF 17 35 12 0.6 35 19 0.038 0.021 51104CEF 20 35 10 0.3 35 21 0.028 0.015 51204CEF 20 40 14 0.6 40 22 0.059 0.032 51105CEF 25 42 11 0.6 42 26 0.043 0.023 51205CEF 25 47 15 0.6 47 27 0.085 0.046 51106CEF 30 47 11 0.6 47 32 0.049 0.026 51206CEF 30 52 16 0.6 52 32 0.11 0.056 51107CEF 35 52 12 0.6 52 37 0.062 0.033 51207CEF 35 62 18 1 62 37 0.16 0.086 51108CEF 40 60 13 0.6 60 42 0.092 0.049 51208CEF 40 68 19 1 68 42 0.21 0.11 51109CEF 45 65 14 0.6 65 47 0.11 0.059 51209CEF 45 73 20 1 73 47 0.24 0.13 51110CEF 50 70 14 0.6 70 52 0.12 0.063 51210CEF 50 78 22 1 78 52 0.29 0.16 51111CEF 55 78 16 0.6 78 57 0.17 0.093 51211CEF 55 90 25 1 90 57 0.46 0.25 51112CEF 60 85 17 1 85 62 0.22 0.12 51212CEF 60 95 26 1 95 62 0.52 0.28 51113CEF 65 90 18 1 90 67 0.25 0.13 51213CEF 65 100 27 1 100 67 0.58 0.31 51114CEF 70 95 18 1 95 72 0.27 0.14 51214CEF 70 105 27 1 105 72 0.61 0.33 51115CEF 75 100 19 1 100 77 0.3 0.16 51215CEF 75 110 27 1 110 77 0.65 0.35 51116CEF 80 105 19 1 105 82 0.32 0.17 51216CEF 80 115 28 1 115 82 0.72 0.38 51117CEF 85 110 19 1 110 87 0.34 0.18 51217CEF 85 125 31 1 125 88 0.94 0.5 51118CEF 90 120 22 1 120 92 0.5 0.27 51218CEF 90 135 35 1.1 135 93 1.3 0.69 51120CEF 100 135 25 1 135 102 0.74 0.39 51220CEF 100 150 38 1.1 150 103 1.73 0.92 51122CEF 110 145 25 1 145 112 0.8 0.43 51124CEF 120 155 25 1 155 122 0.86 0.46 Insert Ball Bearings Designation Dimensions Mounting dimensions Weight d D B S C r/min G ds (kg)      (mm)        ZrO2 Si3N4 UC201CEF 12 47 31 12.7 17 0.6 4.5 M6 x 1 0.16 0.09 UC202CEF 15 47 31 12.7 17 0.6 4.5 M6 x 1 0.15 0.08 UC203CEF 17 47 31 12.7 17 0.6 4.5 M6 x 1 0.14 0.07 UC204CEF 20 47 31 12.7 17 1 4.5 M6 x 1 0.12 0.07 UC205CEF 25 52 34.1 14.3 17V 1 5 M6 x 1 0.17 0.09 UC206CEF 30 62 38.1 15.9 19 1 5 M6 x 1 0.27 0.14 UC207CEF 35 72 42.9 17.5 20 1.1 6 M8 x 1 0.4 0.21 UC208CEF 40 80 49.2 19 21 1.1 8 M8 x 1 0.54 0.29 UC209CEF 45 85 49.2 19 22 1.1 8 M8 x 1 0.57 0.3 UC210CEF 50 90 51.6 19 24 1.1 9 M10 x 1 0.64 0.34 UC211CEF 55 100 55.6 22.2 25 1.5 9 M10 x 1 0.89 0.48 UC212CEF 60 110 65.1 25.4 27 1.5 10 M10 x 1 1.2 0.64 UC213CEF 65 120 65.1 25.4 27 1.5 10 M10 x 1 1.51 0.8 UC214CEF 70 125 74.6 30.2 29 1.5 12 M12 x 1.25 1.68 0.89 UC215CEF 75 130 77.8 33.3 30 1.5 12 M12 x 1.25 1.86 0.99 UC216CEF 80 140 82.6 33.3 33 2 14 M12 x 1.25 2.17 1.16 UC217CEF 85 150 85.7 34.1 36 2 14 M12 x 1.25 2.62 1.39 UC218CEF 90 160 96 39.7 37 2 14 M12 x 1.25 3.31 1.76 UC220CEF 100 180 108 42 41 2 14 M12 x 1.25 3.46 1.85

One-way Clutch GFR GFRN Series

Product Description: One-way Clutch Bearing GFR GFRN Series are mainly applied in aero-engine, reducer, starting system and the transmitting system of helicopter. Working speed can reach 30000rpm in special condition.GFR GFRN Series One-way Clutch or Sprag style bearings are constructed from a drawn cup with needle roller clutches and have a small radial section height. GFR GFRN Series One-way Clutch Application • Paper moving for copiers, fax machines, paper towel dispensers, etc. • Exercise equipment • Appliances • Two-speed gearboxes • Rack indexing drives • Converters, non-return devices and transcendental clutches. • Fishing Reels, RC Cars, RC Helis, RC Engines Bearing Number Size Overrunning speeds Dh7 Number B bp10 Weight dH7 TKN nimax namax z (mm) (Nm) min-1 min-1 (mm) (mm) (mm) (Kg) GFR GFRN12 12 55 4000 7200 62 3 27 4 0,5 GFR GFRN15 15 125 3600 6500 68 3 32 5 0,8 GFR GFRN20 20 181 2700 5600 75 4 39 6 1,0 GFR GFRN25 25 288 2100 4500 90 4 40 8 1,5 GFR GFRN30 30 500 1700 4100 100 6 48 8 2,2 GFR GFRN35 35 725 1550 3800 110 6 51 10 3,0 GFR GFRN40 40 1025 1150 3400 125 6 59 12 4,6 GFR GFRN45 45 1125 1000 3200 130 8 59 14 4,7 GFR GFRN50 50 2125 800 2800 150 8 72 14 7,2 GFR GFRN55 55 2625 750 2650 160 8 72 16 8,6 GFR GFRN60 60 3500 650 2450 170 10 89 18 10,5 GFR GFRN70 70 5750 550 2150 190 10 108 20 13,5 GFR GFRN80 80 8500 500 1900 210 10 108 22 18,2 GFR GFRN90 90 14500 450 1700 230 10 125 25 28,5 GFR GFRN100 100 20000 350 1450 270 10 131 28 42,5 GFR GFRN130 130 31250 250 1250 310 12 168 32 65,0 GFR GFRN150 150 70000 200 980 400 12 194 36 138,0

One-way Clutch Bearing NF Series

Product Description: One-way Clutch Bearing NF Series  are constructed from a drawn cup with needle roller clutches and have a small radial section height.NF Series One-way Clutch are often called One Way Bearings, Anti-Reverse Bearings and Clutch bearings. One-way Clutch NF Series Features: small size, transmitting high torque, smooth combining, high slip combining, working without noise, etc. ONE WAY BEARING APPLICATIONS • Paper moving for copiers, fax machines, paper towel dispensers, etc. • Exercise equipment • Appliances • Two-speed gearboxes • Rack indexing drives • Converters, non-return devices and transcendental clutches. • Fishing Reels, RC Cars, RC Helis, RC Engines Bearing Number Size Overrunning  speeds Dn6 D5 D6 L t bH11 r r1 Weight dH7 TKN nimax namax (mm) (Nm) min-1 min-1 (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (Kg) NF8 8 20 5000 6000 37 30 20 20 3 6 1,0 1,5 0,1 NF12 12 20 5000 6000 37 30 20 20 3 6 1,0 1,5 0,1 NF15 15 78 4500 5400 47 37 26 30 3,5 7 1,5 1,5 0,3 NF20 20 188 3000 3600 62 52 37 36 3,5 8 2,0 2,0 0,6 NF25 25 250 2200 2600 80 68 49 40 4 9 2,5 2,0 1,1 NF30 30 500 1800 2100 90 75 52,5 48 5 12 2,5 2,0 1,6 NF35 35 663 1600 1950 100 80 58 53 6 13 2,5 2,5 2,3 NF40 40 1100 1250 1700 110 90 62 63 7 15 3,0 2,5 3,1 NF45 45 1500 1100 1500 120 95 69 63 7 16 3,0 2,5 3,7 NF50 50 2375 850 1300 130 110 82 80 8,5 17 3,5 3,0 5,4 NF55 55 2500 800 1200 140 115 83 80 9 18 3,5 3,0 6,1 NF60 60 4250 700 1100 150 125 93,5 95 9 18 3,5 3,5 8,5 NF70 70 5875 620 900 170 140 106 110 9 20 3,5 3,5 13,0 NF80 80 10000 550 800 190 160 122 125 9 20 4,0 3,5 18,0 NF90 90 17250 480 700 215 180 133 140 11,5 24 4,0 4,0 25,3 NF100 100 19625 400 600 260 210 157 150 14,5 28 4,0 4,0 42,1 NF130 130 34750 300 480 300 240 188 180 17 32 5,0 5,0 65,0 NF150 150 44375 250 400 320 260 205 180 17 32 5,0 5,0 95,0

One-way Clutch GFK Series

Product Description: One-way Clutch GFK Series or Sprag style bearings are constructed from a drawn cup with needle roller clutches and have a small radial section height.One-way Clutch Bearing GFK Series are mainly applied in aero-engine, reducer, starting system and the transmitting system of helicopter. GFK Series One-way Clutch Application • Paper moving for copiers, fax machines, paper towel dispensers, etc. • Exercise equipment • Appliances • Two-speed gearboxes • Rack indexing drives • Converters, non-return devices and transcendental clutches. • Fishing Reels, RC Cars, RC Helis, RC Engines Bearing Number Size Over running  speeds Bearing  series Loads Weight d TKN nimax namax Rollers  Balls   Rollers  Balls stat. (mm) (Nm) min-1 min-1 dyn. C(N) dyn.C(N) stat. C0 (N) stat. C0 (N) (Kg) GFK20 20 51 5500 4000 5904 5600 4400 2900 2750 0,09 GFK25 25 65 5300 3800 5905 6300 5300 3450 3350 0,11 GFK30 30 95 5000 3500 5906 7700 5500 4600 3650 0,13 GFK35 35 204 4600 3200 5907 8200 8500 5200 5700 0,20 GFK40 40 315 4200 3000 5908 8650 9300 5750 6700 0,30 GFK45 45 370 3800 2500 5909 9200 9700 6350 7300 0,34 GFK50 50 460 3400 2200 5910 9650 10000 6950 7800 0,36

Double row ball slewing bearing/External gear type

Product Description: Advantages 1.  External Gear Type Slewing Bearing can bear axial, radial load and tilting moment load simultaneously. 2. Ball Slewing Bearing/External Gear Type can be combined with pinion, planetary gearbox and motors. 3.Custom-design is available.( non-standard model) The RunFine ball slewing bearing/External gear type  must support and transmit the operating loads of the structure to which it is connected; furthermore, RunFine slewing bearings must guarantee the application's required degree of precision, compliance with operating parameters and the requested life-cycle. It is clear that the slewing bearing is a fundamental component for the application in which it is inserted, which must be selected according to specific technical analyses.  Designations Dimension (mm) Bolt hole Diameter (mm) Weight Da di H La Li na3) ni3) m z (Kg) E.504.2.25.00.D.6 504 300 95 16 17 16 17 8 61 65 E.608.2.25.10.D.6 608 382 95 24 17 24 17 8 74 84 E.712.2.25.12.D.6 712 470 98 24 17 24 17 8 87 103 E.1079.2.20.12.D.3-V 1079 893 90 30 M16 30 18 8 131 140 E.1080.2.22.00.D.6 1080 893 92 30 17 30 17 8 133 150 E.1200.2.25.00.D.1 1200 976 98 36 19 36 19 8 148 210 Integral synthetic rubber seals effectively protect the bearing from the ingress of foreign matter, as well as prevent the escape of grease. Compared to the traditional pivot arrangement, Double row bearing/External gear type have many design and functional advantages. 

Double row ball slewing bearing (Internal gear type)

Product Description: Product description Slewing Bearing Features:   Double row ball slewing bearings (Internal gear type) have more features: Compact structure, reliable guide, simple installation, and easily maintenance Light series slewing bearings are generally available from stock, and mating pinions for the geared versions are also generally availableManufactured to AGMA Class Q5 quality and .005 to .015 inches allowance for backlash The RunFine ball slewing bearing (Internal gear type)  must support and transmit the operating loads of the structure to which it is connected; furthermore, RunFine slewing bearings must guarantee the application's required degree of precision, compliance with operating parameters and the requested life-cycle. It is clear that the slewing bearing is a fundamental component for the application in which it is inserted, which must be selected according to specific technical analyses.  Designations (non-gear type)  Dimension (mm) Bolt hole Diameter (mm) Weight Da di H La Li na3) ni3) m z (Kg) I.973.2.22.00.D.6 973 786 97 36 17 36 17 8 100 141 I.1165.2.22.00.D.6 1165 962 97 36 17 36 17 10 98 187 I.1200.2.25.00.D.6 1200 963.5 110 36 21 36 21 10 98 230 I.1346.2.30.05.D.6 1345 1061.6 108 48 21 48 21 10 108 326 I.1750.2.30.20.D.6 1750 1418.4 120 48 25 48 25 12 120 564 Integral synthetic rubber seals effectively protect the bearing from the ingress of foreign matter, as well as prevent the escape of grease. Compared to the traditional pivot arrangement, Double row slewing bearing (Internal gear type) have many design and functional advantages. 

Single-row Four Point Contact Ball Slewing Bearing

Product Description: Technical staff at RunFine-BEARINGS is at your service to provide assistance when selecting the most suitable  Four Point  Slewing Bearing/Internal Gear for your application. The most common applications are: excavators, concrete pumps, boom lifts and man lifts, crane trucks, civil and harbour cranes, compactors, wind turbines, radars, manipulators and positioners, filling carousels, rotary tables. The RunFine Contact Ball Slewing Bearing /Internal Gear  must support and transmit the operating loads of the structure to which it is connected; furthermore, RunFine slewing bearings must guarantee the application's required degree of precision, compliance with operating parameters and the requested life-cycle. It is clear that the slewing bearing is a fundamental component for the application in which it is inserted, which must be selected according to specific technical analyses.  Designations (non-gear type)  Dimension (mm) Bolt hole Diameter (mm) Weight Da di H La Li na3) ni3) m z (Kg) I.505.20.00.C 518 325 56 490 375 8 12 5 67 27.5 I.650.20.00.C 648 444 56 620 505 10 16 6 76 38 I.750.20.00.C 748 546 56 720 605 12 18 6 93 45 I.850.20.00.C 848 648 56 820 705 12 20 6 110 51.5 I.950.20.00.C 948 736 56 920 805 14 20 8 94 61.5 I.1050.20.00.C 1048 840 56 1020 905 16 22 8 107 67.5 I.1200.20.00.C 1198 984 56 1170 1055 16 24 8 125 81.5 Integral synthetic rubber seals effectively protect the bearing from the ingress of foreign matter, as well as prevent the escape of grease. Compared to the traditional pivot arrangement, Slewing Bearing /Internal Gear have many design and functional advantages. 

Single-row Four Point Contact Ball  /External gear

Product Description: The RunFine Single-row Contact Ball  /External gear  must support and transmit the operating loads of the structure to which it is connected; furthermore, RunFine slewing bearings must guarantee the application's required degree of precision, compliance with operating parameters and the requested life-cycle. It is clear that the slewing bearing is a fundamental component for the application in which it is inserted, which must be selected according to specific technical analyses.  Integral synthetic rubber seals effectively protect the bearing from the ingress of foreign matter, as well as prevent the escape of grease. Compared to the traditional pivot arrangement,  Contact Ball Slewing Bearing /External gear  have many design and functional advantages.  Designations Dimension (mm) Bolt hole Diameter (mm) Weight Da di H La Li m z (Kg) E.505.20.00.C 503.3 304 56 455 332 5 99 29.5 E.650.20.00.C 640 434 56 585 462 6 105 41.5 E.750.20.00.C 742 534 56 685 562 6 122 48.5 E.850.20.00.C 838 634 56 785 662 6 138 54.5 E.950.20.00.C 950 734 56 885 762 8 117 65.5 E.1050.20.00.C 1046 834 56 985 862 8 129 71.5 E.1200.20.00.C 1198 984 56 1135 1012 8 148 83.5 Single-row Slewing Bearing /External gear are large-sized bearings specifically designed to accommodate oscillating movements. They are comprised of an inner ring and an outer ring, one of which usually incorporates a gear. Single-row Four Point Contact Ball  /External gear   raceways, in conjunction with the rolling elements (and cages or spacers), are designed to accommodate loads, acting singly or in combination, and in any direction. 

Four Point Contact Ball with flange/Non-gear teeth

Product Description: Single Row Non-Gear Teeth Bearing  are necessary when in a given machine or system, one structural part needs to rotate in the opposite direction to another along a fixed axis, Single-row Slewing Bearing with Flange whilst guaranteeing the axial and radial link between the two parts. Integral synthetic rubber seals effectively protect the bearing from the ingress of foreign matter, as well as prevent the escape of grease. Compared to the traditional pivot arrangement, Single-row Slewing Bearing with Flange have many design and functional advantages.  Designations (non-gear type)  Dimension (mm) Bolt hole Diameter (mm) Weight Da di H La Li (Kg) SD.505.20.00.C 518 304 56 490 332 23 SD.650.20.00.C 648 434 56 620 462 34 SD.750.20.00.C 748 534 56 720 562 40 SD.850.20.00.C 848 634 56 820 662 46 SD.950.20.00.C 948 734 56 920 762 52 SD.1050.20.00.C 1048 834 56 1020 862 58 SD.1200.20.00.C 1198 984 56 1170 1012 67 Single-row Four Point Contact Ball with flange /Non- gear teeth are large-sized bearings specifically designed to accommodate oscillating movements. They are comprised of an inner ring and an outer ring, one of which usually incorporates a gear. Single-row Slewing Bearing with Flange  raceways, in conjunction with the rolling elements (and cages or spacers), are designed to accommodate loads, acting singly or in combination, and in any direction. 

Single-row Four Point Contact Ball Type

Product Description: The assembly is much more compact and its hollow centre permits the installation of driving mechanisms and the passage of various control devices; the superstructures of the rotating part are more easily accessible. The small difference in height between the geared ring and un-geared ring reduces the overhang of the driving pinion.   Integral synthetic rubber seals effectively protect the bearing from the ingress of foreign matter, as well as prevent the escape of grease. Compared to the traditional pivot arrangement, Single-row Four Point Contact Ball Type  have many design and functional advantages.  Designations (non-gear type)   Dimension (mm) Basic load  ratings Weight D d H D1 D2 (KN) (Kg) 013.30.500 602 398 80 566 434 1290 75.8 014.30.500 602 398 80 566 434 1290 75.8 013.30.560 662 458 80 626 494 1440 94 014.30.560 662 458 80 626 494 1440 94 013.30.630 732 528 80 696 564 1870 110 014.30.630 732 528 80 696 564 1870 110 013.30.710 812 608 80 776 644 2120 120 014.30.710 812 608 80 776 644 2120 120 013.40.800 922 678 100 878 722 3130 256 014.40.800 922 678 100 878 722 3130 256 013.40.900 1022 778 100 978 822 3550 240 014.40.900 1022 778 100 978 822 3550 240 013.40.1000. 1122 878 100 1078 922 3940 305 014.40.1000 1122 878 100 1078 922 3940 305 013.40.1120 1242 998 100 1198 1045 4430 300 014.40.1120 1242 998 100 1198 1042 4430 300 013.45.1250 1390 1110 110 1337 1163 5540 420 014.45.1250 1390 1110 110 1337 1163 5540 420 013.45.1400 1540 1260 110 1487 1313 6170 480 014.45.1400 1540 1260 110 1487 1313 6170 480 013.45.1600 1740 1460 110 1687 1513 7020 550 014.45.1600 1740 1460 110 1687 1513 7020 550 013.45.1800 1940 1660 110 1887 1713 7930 610 014.45.1800 1940 1660 110 1887 1713 7930 610 013.60.2000 2178 1825 144 2110 1891 12100 1100 014.60.2000 2178 1825 144 2110 1891 12100 1100 013.60.2240 2418 2065 144 2350 2131 13500 1250 014.60.2240 2418 2065 144 2350 2131 13500 1250 013.60.2500 2678 2325 144 2610 2391 15000 1400 014.60.2500 2678 2325 144 2610 2391 15000 1400 013.60.2800 2978 2625 144 2910 2691 16800 1600 014.60.2800 2978 2625 144 2910 2691 16800 1600 013.75.3150 3376 2922 174 3286 3014 23800 2800 014.75.3150 3376 2922 174 3286 3014 23800 2800 013.75.3350 3776 3322 174 3686 3414 26900 3200 014.75.3550 3776 3322 174 3686 3414 26900 3200 013.75.4000 4226 3772 174 4136 3864 30200 3600 014.75.4000 4226 3772 174 4136 3864 30200 3600 013.75.4500 4726 4272 174 4636 4364 34100 4000 014.75.4500 4726 4272 174 4636 4364 34100 4000 Slewing Bearing /Internal Gear  are large-sized bearings specifically designed to accommodate oscillating movements. They are comprised of an inner ring and an outer ring, one of which usually incorporates a gear. Single-row Slewing Bearing /Internal Gear raceways, in conjunction with the rolling elements (and cages or spacers), are designed to accommodate loads, acting singly or in combination, and in any direction. 

Single Row External Gear Slewing Bearing

Product Description: Integral synthetic rubber seals effectively protect the bearing from the ingress of foreign matter, as well as prevent the escape of grease. Compared to the traditional pivot arrangement, Single-row External Gear Slewing Bearing have many design and functional advantages.  Single Row Slewing Bearing-External Gear  are large-sized bearings specifically designed to accommodate oscillating movements. They are comprised of an inner ring and an outer ring, one of which usually incorporates a gear.Four Point Contact Ball Slewing Bearing raceways, in conjunction with the rolling elements (and cages or spacers), are designed to accommodate loads, acting singly or in combination, and in any direction.  Designation (non-gear type)   Dimension (mm) Basic load  ratings Weight D d H D1 D2 (KN) (Kg) 011.20.200 280 120 55 248 152 550 18 011.30.500 602 398 80 566 434 1290 75.8 012.30.500 602 398 80 566 434 1290 75.8 011.30.560 662 458 80 626 494 1440 94 012.30.560 662 458 80 626 494 1440 94 011.30.630 732 528 80 696 564 1870 110 012.30.630 732 528 80 696 564 1870 110 011.30.710 812 608 80 776 644 2120 120 012.30.710 812 608 80 776 644 2120 120 011.40.800 922 678 100 878 722 3130 256 012.40.800 922 678 100 878 722 3130 256 011.40.900 1022 778 100 978 822 3550 240 012.40.900 1022 778 100 978 822 3550 240 011.40.1000.12 1122 878 100 1078 922 3940 305 012.40.1000 1122 878 100 1078 922 3940 305 011.40.1120 1242 998 100 1198 1045 4430 300 012.40.1120 1242 998 100 1198 1042 4430 300 011.40.1120.12K 1242 998 100 1198 1042 3340 352 012.40.1120.12K 1242 998 100 1198 1042 3340 334 011.45.1250 1390 1110 110 1337 1163 5540 420 012.45.1250 1390 1110 110 1337 1163 5540 420 011.45.1400 1540 1260 110 1487 1313 6170 480 012.45.1400 1540 1260 110 1487 1313 6170 480 011.45.1600 1740 1460 110 1687 1513 7020 550 012.45.1600 1740 1460 110 1687 1513 7020 550 011.45.1800 1940 1660 110 1887 1713 7930 610 012.45.1800 1940 1660 110 1887 1713 7930 610 011.60.2000 2178 1825 144 2110 1891 12100 1100 012.60.2000 2178 1825 144 2110 1891 12100 1100 011.60.2240 2418 2065 144 2350 2131 13500 1250 012.60.2240 2418 2065 144 2350 2131 13500 1250 011.60.2500 2678 2325 144 2610 2391 15000 1400 012.60.2500 2678 2325 144 2610 2391 15000 1400 011.60.2800 2978 2625 144 2910 2691 16800 1600 012.60.2800 2978 2625 144 2910 2691 16800 1600 011.75.3150 3376 2922 174 3286 3014 23800 2800 012.75.3150 3376 2922 174 3286 3014 23800 2800 011.75.3350 3776 3322 174 3686 3414 26900 3200 012.75.3550 3776 3322 174 3686 3414 26900 3200 011.75.4000 4226 3772 174 4136 3864 30200 3600 012.75.4000 4226 3772 174 4136 3864 30200 3600 011.75.4500 4726 4272 174 4636 4364 34100 4000 012.75.4500 4726 4272 174 4636 4364 34100 4000 The assembly is much more compact and its hollow centre permits the installation of driving mechanisms and the passage of various control devices; the superstructures of the rotating part are more easily accessible. The small difference in height between the geared ring and un-geared ring reduces the overhang of the driving pinion.  

Contact Ball Type Slewing Bearing/Non-gear

Product Description: Single-row Contact Ball Type /Non-gear  are large-sized bearings specifically designed to accommodate oscillating movements. They are comprised of an inner ring and an outer ring, one of which usually incorporates a gear. Contact Ball Type Slewing Bearing /Non-gear raceways, in conjunction with the rolling elements (and cages or spacers), are designed to accommodate loads, acting singly or in combination, and in any direction.  Integral synthetic rubber seals effectively protect the bearing from the ingress of foreign matter, as well as prevent the escape of grease. Compared to the traditional pivot arrangement, Single-row Slewing Bearing /Non-gear have many design and functional advantages.  Designations (Non-gear type)  Dimension  (mm) Bolt Hole Diameter  (mm) Basic load ratings (KN) Weight (Kg) D Di H D1 D2 010.30.500 602 398 80 566 434 1290 75.8 010.30.560 662 458 80 626 494 1440 94 010.30.630 732 528 80 696 564 1870 110 010.30.710 812 608 80 776 644 2120 120 010.30.955.11 1098 893 90 1060 845 2700 126 010.40.800 922 678 100 878 722 3130 256 010.40.900 1022 778 100 978 822 3550 240 010.40.100 1122 878 100 1078 922 3940 305 010.40.1120 1242 998 100 1198 1042 4430 300 010.45.1250 1390 1110 110 1337 1163 5540 420 010.45.1400 1540 1260 110 1487 1313 6170 480 010.45.1600 1740 1460 110 1687 1513 7020 550 010.40.1800 1940 1660 110 1887 1713 7930 610 010.60.2000 2178 1825 144 2110 1891 12100 1100 010.60.2240 2418 2065 144 2350 2131 13500 1250 010.60.2500 2678 2325 144 2610 2391 15000 1400 010.60.2800 2978 2625 144 2910 2691 16800 1600 010.75.3150 3376 2922 174 3286 3014 23800 2800 010.75.3550 3776 3322 174 3686 3414 26900 3200 010.75.4000 4226 3772 174 4136 3864 30200 3600 010.75.4500 4726 4272 174 4636 4364 34100 4000 116752 480 260 60 444 296 750.4 55 176792 590 460 45 570 488 620.6 35.9 176792K2M 590 460 45 570 488 940.4 30.8 1167/530 780 530 60 740 560 1120 103 1167/560K 720 560 36 690 590 700.8 39.2 E787/760G2 950 760 80 915 795 203 138 787/800 1050 800 90 1012 838 2150 192 71769/850Y 1120 850 85 1074 924 1510 248 787/932G2 1200 932 120 1148 984 3490 328 787/960G2 1165 960 90 1135 1040 2490 202 787/1260G2 1509 1260 90 1465 1315 3780 274 71169/1400Y 1820 1400 136 1750 1470 6110 1114 787/1440G2 1780 1440 100 1730 1494 5030 533 787/1628G2 1927 1628 130 1875 1680 6920 732 78//1700KM 2000 1700 150 1950 1750 6840 826 The assembly is much more compact and its hollow centre permits the installation of driving mechanisms and the passage of various control devices; the superstructures of the rotating part are more easily accessible. The small difference in height between the geared ring and un-geared ring reduces the overhang of the driving pinion.  

Crossed Cylindrical Roller Slewing Bearings

Product Description: Crossed Cylindrical Roller Slewing Bearings are generally manufactured in very large diameters. For that reason on site inspection capabilities is necessary. Backed by years of Roller Slewing Bearing application experience and manufacturing knowledge, RunFine knows how to perform accurate investigations and bearings tests on site.  Crossed Cylindrical Roller Slewing Ring Bearings are extensively applied in such industries as metallurgy, vessel, oil, chemistry, mine, coal, hydroelectric power, port machinery, heavy machinery and aerospace or some other fields. Regular ap Designations  Boundary Dimension (mm) Bolt Hole Diameter (mm) Weight Da  Di H  La Li (Kg) 161.16.0400.890.11.1503 495.2 325 55 448 352 33 161.16.0450.890.11.1503 554 369 55 500 400 41 161.16.0560.890.11.1503 664 479 55 610 510 50 161.16.0630.890.11.1503 742.8 543 55 682 578 61 161.20.0450.890.11.1503 562.8 364 62 505 395 49 161.20.0560.890.11.1503 676.8 474 62 615 505 62 161.20.0630.890.11.1503 758.4 538 62 687 573 76 161.20.0710.890.11.1503 838.4 618 62 767 653 85 161.25.0764.890.11.1503 892.8 662 73 830 698 116 161.25.0886.890.11.1503 1030.4 784 73 952 820 144 161.25.0980.890.11.1503 1118.4 878 73 1046 914 155 161.25.1077.890.11.1503 1228 975 73 1143 1011 178 161.25.1120.890.11.1503 1278 1008 73 1188 1052 195 161.25.1180.890.11.1503 1338 1068 73 1248 1112 206 161.25.1250.890.11.1503 1408 1138 73 1318 1182 216 161.25.1320.890.11.1503 1497.6 1208 73 1388 1252 247 161.28.1400.890.11.1503 1593.6 1266 80 1482 1318 332 161.28.1500.890.11.1503 1689.6 1366 80 1582 1418 349 161.28.1600.890.11.1503 1803.2 1466 80 1682 1518 388 161.28.1700.890.11.1503 1915.2 1566 80 1782 1618 431 161.36.1700.890.11.1503 1943.2 1529 100 1805 1595 653 161.36.1800.890.11.1503 2041.2 1629 100 1905 1695 685 161.36.1900.890.11.1503 2139.2 1729 100 2005 1795 721 161.36.2000.890.11.1503 2237.2 1829 100 2105 1895 749 161.40.2000.890.11.1503 2252.8 1824 108 2110 1890 848 161.40.2128.890.11.1503 2380.8 1952 108 2238 2018 896 161.40.2240.890.11.1503 2492.8 2064 108 2350 2130 946 161.40.2368.890.11.1503 2620.8 2192 108 2478 2258 993 161.45.2240.890.11.1503 2516.4 2057 119 2357 2123 1122 161.45.2366.890.11.1503 2642.4 2183 119 2483 2249 1182 161.45.2510.890.11.1503 2786.4 2327 119 2627 2393 1258 161.45.2654.890.11.1503 2930.4 2471 119 2771 2537 1329 plication areas: Mine machine, port hoisting machine, port oil transfer equipment, onshore and offshore crane, excavator, concrete machine, paper machine, plastic and rubber machine, weave machine, steel plant, electronic power plant, wind power generator, other construction and industry machines or equipment.

Deep Groove Ball Bearing
Cylindrical Roller Bearings
Drawn Cup Needle Roller Bearings

News

2018 China International Bearing Industry Exhibition

2018 China International Bearing Industry Exhibition (the 16th session) will be held in Shanghai World Expo Exhibition & Convention Center from September 19 to 22, 2018. Covering an area of 55000Sq.m. with estimated 1000 exhibitors and 60000 visitors from all over the world will gather together. Purchasers from 50 countries and regions will be active at the exhibition hall for business cooperation. The exhibits include all types of bearings as well as high-end bearings, and will cover special equipments, precision measurements, accessories and parts, transmission components, lubricant greases, and so on. The new products, new technology, new material, new technique and equipment will represent the latest development trend of today`s world bearings and related products. We will focus on inviting buyers from main equipment industry and distributors at home and abroad to participate in the exhibition and various activities. It will provide more information and opportunities to all exhibitors. In order to promote the development of bearing industry, improve the level of the fair, strengthen enterprise communication, we sincerely invite you to attend the exhibition. We are Ningbo Ritbearing Import & Export Co.,Ltd.
more

Send Inquiry

Your message must be between 20-3000 characters